464191
37
Zoom out
Zoom in
Previous page
1/80
Next page
Advanced Operations
33
The Info menu displays the settings for the input source for the images being projected, and also shows
the lamp status.
The "Lamp" shows times between 0 and 10 hours as 0H. Times greater than 10 hours appear in units of
one hour.
Info Menu
Video (INPUT A (Component), INPUT B (Component), D4 VIDEO, S VIDEO,
VIDEO)
Main menu Sub-menu Function
Default
setting
Info Lamp
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in red.
Press the button on either the projector's control panel or the remote
control to display the Reset Lamp Timer menu.
You should reset the lamp operating time when the lamp is replaced.
When this is done, the cumulative lamp operating time will be cleared and
reset to the default value.
0H
Video Source Displays the image source which is currently being projected. Depends on
connection
Input Signal Displays the video signal format. Auto
Computer (DVI, INPUT A (RGB), INPUT B (RGB))
Main menu Sub-menu Function
Default
setting
Info Lamp
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in red.
Press the button on either the projector's control panel or the remote
control to display the Reset Lamp Timer menu.
You should reset the lamp operating time when the lamp is replaced.
When this is done, the cumulative lamp operating time will be cleared and
reset to the default value.
0H
Video Source Displays the image source which is currently being projected. Depends on
connection
-,+ :Select
:Enter
Lamp
0H
Video
Auto(NTSC)
Video Source
Input Signal
Image InfoSetupSignal
Video (INPUT A (Component), INPUT B (Component), D4 VIDEO, S VIDEO, VIDEO)
-,+:Select
:Enter
Lamp
H
INPUT B
––––––
––––––
––––––
––––––
V
–––.––kHz
–––. Hz
H
V
–––– x ––––
0H
Video Source
Input Signal
Frequency
Sync Polarity
Sync Mode
Resolution
–––. Hz
Refresh Rate
Image InfoSetupSignal
Computer
Image menu Set up menu
Signal menu Info menu
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha LPX-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha LPX-500 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha LPX-500

Yamaha LPX-500 User Manual - English - 80 pages

Yamaha LPX-500 User Manual - German - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info