516888

Yamaha ISX-800 Restio Manual

19
Zoom out
Zoom in
Previous page
1/164
Next page
17 En
TROUBLESHOOTING
English
CD playback
Problem Cause Solution
Disc cannot be inserted.
The system is set to power save mode.
Press to cancel the power save mode (☞ P. 2).
Some button operations do not work.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 18).
Playback does not start immediately after
pressing / .
The disc may be dirty. Wipe the disc clean.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 18).
If the unit was moved from a cold to warm place,
condensation may have formed on the disc reading
lens.
Wait for an hour or two until the unit adjusts to the
room temperature, and try again.
The CD indicator flashes twice, and
repeated 3 times, and the disc is ejected.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 18).
The disc may be dirty. Wipe the disc clean.
The disc does not contain playable files. Use a disc contains playable files (☞ P. 18, 19).
The disc is loaded back to front. Insert a disc facing the label side to near side.
“Err” is displayed in the front panel
display after loading a disc.
An error occurs in the unit.
Eject the disc with .
USB device playback
Problem Cause Solution
MP3/WMA file on the USB device does
not play.
The USB device is not recognized. Turn off the system and reconnect the USB device
to the unit.
Connect an AC adapter if supplied with the device.
If the solutions above do not resolve the problem,
the USB device is not playable on the unit.
The USB indicator flashes twice, and
repeated 3 times, after connecting a USB
device.
An incompatible USB device is connected to the
unit.
Turn off the system and reconnect the USB device
to the unit. If it does not resolve the problem, the
USB device is not playable on the unit.
The USB device does not contain playable files. Use a USB device contains playable files (☞ P. 18,
19).
“Err” is displayed in the front panel
display after connecting a USB device.
An incompatible USB device is connected to the
unit.
Turn off the system and reconnect the USB device
to the unit. If it does not resolve the problem, the
USB device is not playable on the unit.
An overcurrent is detected.
FM radio reception
Problem Cause Solution
Too much noise during stereo broadcast.
The antenna may be connected improperly. Make sure the antenna is connected properly
(☞ P. 3).
The radio station you selected may be far from your
area, or the radio wave reception is weak in your
area.
Try manual tuning to improve the signal quality
(☞ P. 10) or use a multi-channel outdoor antenna.
Even with an outdoor antenna, radio wave
reception is weak. (Sound is distorted.)
Multipath reflection or other radio interferences
may have occurred.
Change the height, direction, or placement of the
antenna.
Remote control
Problem Cause Solution
The remote control does not work
properly.
The remote control may be operated outside its
operation range.
For information on the remote control operation
range, refer to “How to use the remote control”
(P. 1).
The remote control signal receiver on the unit
(☞ P. 3) may be exposed to direct sunlight or
lighting (inverted fluorescent lamps).
Change the lighting or orientation of the unit.
The battery may be worn out. Replace the batteries with two new ones.
There are obstacles between the remote control
signal receiver on the unit and the remote control.
Remove the obstacles.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha ISX-800 Restio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha ISX-800 Restio in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info