549945
32
Zoom out
Zoom in
Previous page
1/42
Next page
32
Changing the RDS modes
When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station
light up in the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDS
modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be
selected.) Illumination of the indicator at the head of a name of an RDS mode shows that the corresponding RDS mode is selected.
* When an RDS station is received, do not press the RDS MODE/FREQ button until one or more RDS mode names light up in the
display. If the button is pressed before one or more names light up in the display, the mode cannot be changed because the unit
has not received all of the RDS data on the station yet.
* If no RDS mode name lights up in the display, the mode cannot be changed.
PS mode The name of the station being received is displayed.
If the station does not employ the PS data service, this mode cannot be
selected.
PTY mode The type of the program on the station being received is displayed. If
the station does not employ the PTY data service, this mode cannot be
selected.
(You can make this unit search for a station which is broadcasting a
program of your desired program type. For details, refer to the next
page.)
RT mode Information about the program on the station being received is
displayed. Information is displayed by a maximum of 64 Roman
Alphabets including umlaut sign. If other characters are used on the RT
data, they are displayed with under-bars.
If the station does not employ the RT data service, this mode cannot be
selected.
CT mode Current time is displayed in the following form. The CT data from the
station being received changes every minute.
If the data is accidentally cut off, “CT WAIT” may light up. If the station
does not employ the CT data service, this mode cannot be selected.
Frequency The frequency of the station being received is displayed.
display mode
RDS MODE/
FREQ
Hour
Minute
Notes
RDS data service cannot be utilized by this unit if the received signal is not strong enough. The RT (Radio Text) in particular
transmits a great deal of data and needs strong signal reception to be successfully transmitted, so it may occur that RT mode
cannot be displayed even if other RDS modes (PS, PTY, etc.) are displayed.
There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE
button so that the “AUTO” indicator goes off from the display. Though the reception mode is changed to monaural by this
operation, when you change the display to an RDS mode, RDS data may be displayed.
If the signal strength becomes weakened by external interference during RDS station reception, the RDS data service may be cut
off suddenly and “...WAIT” will be displayed.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha HTR-5130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha HTR-5130 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info