n
No sound from the TV when HDMI Control is used
l The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
l A TV that does not support ARC is connected to the unit only with an HDMI
cable.
Use a digital optical cable to make an audio connection. For details, see the
following:
– “HDMI connection with a TV” (p.21)
l If the TV is connected to the unit with an audio cable, the TV audio input
setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack.
For details, see the following:
– “Setting the audio jack used for TV audio input” (p.73)
l If you are trying to use ARC, ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On”, and enable ARC on the TV. For details,
see the following:
– “Setting the use of ARC” (p.73)
n
Only the front speakers work on multichannel audio
l The playback device is set to output 2-channel audio (such as PCM) only.
To check it, use “Signal Information” in the “Option” menu. If necessary, change
the digital audio output setting on the playback device. For details, see the
following:
– “Checking information about the video/audio signals” (p.57)
n
Noise/hum is heard
l The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
l The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
n
The sound is distorted
l The volume of the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off”. For details, see the following:
– “Setting the use of the eco mode” (p.78)
l A device (such as an external power amplifier) connected to the unit’s audio
output jacks is not turned on.
Turn on all devices connected to the unit’s audio output jacks.
En
93
