559196
6
Zoom out
Zoom in
Previous page
1/16
Next page
English
6
HS80M/HS50M/HS10W Owner’s Manual
XLR-type Connector (Balanced)
This is the type of connector most commonly used in
professional equipment and installations. 3-pin XLR-type
connectors like the ones provided on the HS-series
monitors are primarily intended for use with balanced
signals, and their solid design and construction ensures
maximum electrical and mechanical reliability.
Phone Jack (TRS, Balanced or Unbalanced)
RCA Pin Jack
The HS-series studio monitors also feature 1/4-inch
phone jack connectors that can be used for either balanced
or unbalanced connections.
For balanced connection via these jacks you’ll need to
use balanced cables fitted with TRS phone plugs — three-
contact phone plugs that are basically the same as
standard stereo phone plugs with tip, ring, and sleeve
contacts (thus the “TRS” designation — see the illustration
on the left.)
The phone jacks will also accept unbalanced signals
—simply plug in a standard mono phone plug. But what if
you want to connect equipment that only provides RCA-
type pin connector outputs? The solution is simple
enough: use either RCA-to-phone plug adaptors or RCA-
to-phone cables, and plug into the speaker’s phone-jack
inputs.
If you’re connecting your HS
speakers directly to a mixer such as
one of the Yamaha MG-series mixers,
they should usually be connected to
the mixer’s “C-R” (Control Room)
outputs so that you can control the
monitor level without affecting the
level of the signal sent to the mixer’s
main bus, which will usually be
feeding your recorder or DAW
(Digital Audio Workstation) in a
production type setup.
Pin 2: Signal + or “Hot”
Pin 3: Signal - or “Cold”
Pin 1: Ground
Pin 1: Ground
Pin 3: Signal - or “Cold”
Pin 2: Signal + or “Hot”
Ring: Signal - or “Cold”
Tip: Signal + or “Hot”
Sleeve: Ground
Tip: Signal + or “Hot”
Sleeve: Ground
input
input
LRC-R
OUT
LRST
OUT
MG Series
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha HS10W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha HS10W in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha HS10W

Yamaha HS10W User Manual - German - 16 pages

Yamaha HS10W User Manual - French - 16 pages

Yamaha HS10W User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info