599478
23
Zoom out
Zoom in
Previous page
1/30
Next page
Keyboard Stand Assembly
H01 Owner’s Manual
ENGLISH
23
2. Raise A to the vertical position.
2-1Raise A to the vertical position, with the keyboard
side on the bottom, and hold A securely.
CAUTION
Do not tip A further than 90 degrees to avoid stress to the
key cover and lid.
3. Attach B.
3-1Align the holes on A with those on B and hold A
and B together.
3-2Finger-tighten six short screws (6x20 mm) start-
ing with the top hole.
3-3Tighten the screws securely.
4. Attach C.
4-1Hold C so that the notch on the bracket will face
toward left, then align the holes on A with those
on C.
4-2Finger-tighten four short screws (6x20 mm) start-
ing with the top hole.
4-3Tighten the screws securely.
5. Assemble the pedal structure.
5-1Pass the pedal cord (that comes out from the rear
of pedal box E) through a hole on the bracket of
D, then pass it through the pipe.
5-2Align the holes on the bottom of E with the holes
on the bracket of D, then attach E and D by tight-
ening six small screws (4x6 mm). At this time,
first tighten the two center screws, then tighten
the rest of the screws.
5-3Pull the end of the pedal cord to eliminate any
slack inside the bracket on D.
CAUTION
Hold E securely to avoid slippage.
AA
CAUTION
Do not release A until you
finish Step 4.
A
B
A
B
A
CC
E
D
E
DD
E
21
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha H01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha H01 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha H01

Yamaha H01 Quick start guide - English - 2 pages

Yamaha H01 User Manual - German - 30 pages

Yamaha H01 User Manual - Dutch - 30 pages

Yamaha H01 User Manual - Danish - 30 pages

Yamaha H01 User Manual - French - 30 pages

Yamaha H01 User Manual - Italian - 30 pages

Yamaha H01 User Manual - Polish - 32 pages

Yamaha H01 User Manual - Portuguese - 30 pages

Yamaha H01 User Manual - Swedish - 30 pages

Yamaha H01 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info