E-45
English
Adjusting the graphic equalizer
for your desired sound taste
The 5 band graphic equalizer allows you to adjust the level
for each frequency band.
* Make adjustment by monitoring the equalizer level
indicators on the display.
1 Play back a source. (For source playback, refer to page
18–34.)
2 Press the equalizer control or button once or
more to select the frequency band to which you will adjust
the level.
* The selected frequency band is shown on the display.
* The scale bar of the selected frequency band on the
graphic equalizer level indicators will flash.
3 Press the equalizer control or button once or
more to adjust the level.
4 In the same way, make adjustment for other frequency
band.
Note
If the KARAOKE (including L and R ONLY) program is
selected, cancel it or select another sound field program.
Turning the equalizer to “flat” (the
state with no equalization applied)
By one of the following methods, the settings of preset
graphic equalizer mode (MUSIC) and sound field program
(PROGRAM) are turned off and the equalizer pattern is
turned to “flat”.
• Press the FLAT button on the remote control transmitter.
* Pressing the FLAT button once more will restore the
state before the equalizer was turned to “flat”.
• Press the MUSIC button and the PROGRAM button on the
front panel at the same time.
* There is no way to restore the state before the equalizer
was turned to “flat”.
USING GRAPHIC EQUALIZER