557529

Yamaha GX-900RDS Manual

49
Zoom out
Zoom in
Previous page
1/61
Next page
E-41
English
Editing and titling an MD
Ⅵ To undo the editing
The Undo function lets you immediately return to the condition
before an editing is made (note; you cannot undo the editing
once you press any other button).
1 Press to stop the MD recorder.
2 Press MD EDIT repeatedly to display “Undo
*
1
”, then
press ENTER.
* “Undo OK ?” appears on the display. To cancel undoing,
press
.
3 Press ENTER again to undo.
*
1
: The name of editing you can undo is displayed here.
Ⅵ To cancel the editing
Press .
Ⅵ Divide
This function lets you divide one track into two separate tracks
by adding a new track number to a certain point in the track.
Example: Dividing track 3
1 Play the track you want to divide.
2 Use or to locate the point where you want to
divide the track, then press (or on the remote
control) to pause at that position.
3 Press MD EDIT repeatedly to display “(track number)
Divide ?”, then press ENTER.
* “Check” appears momentarily, then “Divide OK ?”
appears and the MD recorder starts repeating the point
where the track will be divided.
4 If necessary, use the jog dial to adjust the position of the
point where the track will be divided.
* The dividing position can be adjusted up to 2 second
in either direction.
5 Press ENTER.
* The track is divided and “Complete” appears
momentarily.
* If the divided track originally had a track title, the same
title remains on both of the two divided.
After
dividing
Before
dividing
Ⅵ Disc Maintenance
The MD recorder features two disc maintenance functions
which optimize performance of MDs. The TOC Write function
allows you to write the result of editing to the TOC without
having to eject the disc. The FRA Check function recovers
recordable space on a disc that may have been lost because
of repeated editing operations.
TOC Write
When making a recording, the TOC (Table Of Contents) of the
MD is written as soon as recording is finished. When making
an editing or titling operation, however, the TOC isn’t
automatically written unless the disc is ejected. If the MD
recorder is accidentally turned off before writing the result of
editing to the TOC, it is possible that these changes will not be
saved. By using this function, you can ensure that the result of
your edition is saved on the disc.
1 Press to stop the MD recorder.
2 Press MD EDIT repeatedly to display “TOC Write ?”, then
press ENTER.
* “TOC WriteOK?” appears on the display.
3 Press ENTER.
* “TOC Writing” flashes on the display momentarily.
Notes
• You cannot undo the result of editing once it has been
written to the TOC.
• The TOC Write function can only be selected when the
TOC indicator is lit on the display.
FRA Check
When editing operations such as “Move” and “Divide” are
performed, recordable space may be lost and “TOC Full” may
appear on the display to indicate that no more recording can
be performed. When this occurs, it may be possible to recover
the FRA (Freely Recordable Area) on the disc that was lost by
repeated editing operations so that more recording is possible.
1 Press to stop the MD recorder.
2 Press MD EDIT repeatedly to display “FRA Check ?”,
then press ENTER.
* “FRA CheckOK?” appears on the display.
3 Press ENTER.
* “Complete” appears momentarily.
1
23456
1
23456
ADEBC
4
AB DCC
12
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha GX-900RDS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha GX-900RDS in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info