2, 4, 11, 44
1, 33 3, 22
36
GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR CONTROL
Linking a user program to a
specified input source
If a user program is linked with a specified input source,
when the source is selected, the user program operates
automatically. Each of the four user program can be linked
with each different input source.
To link
1 Recall a user program which you had stored in advance,
by pressing the USER button once or more.
(Refer to the previous page for storing a user program.)
2 Press the user program MEMORY button.
3 Press the input selector button whose input source you
want to link with the selected user program.
* The display changes as follows:
* For the meaning of each symbol appearing on the
display, see the list on the left.
4 Press the user program MEMORY button.
The selected user program and input source are linked by
this method.
Note
By this function, when listening to an input source, the linked
user program operates automatically. If desired, however,
you can cancel its operation or switch to a different user
program or any equalizer/sound field mode.
To cancel the linkage of a user program and an input
source.
11 Press the user program MEMORY button.
22 Press the input selector button whose linkage with a user
program you want to cancel.
33 Press the USER button once or more so that “U0”
appears on the display.
44 Press the user program MEMORY button.
Symbol
U0
U1
U2
U3
U4
Meaning
No selection
USER 1
USER 2
USER 3
USER 4
Symbol
A2
TU
CD
TA
A1
Meaning
AUX 2
TUNER
CD
TAPE
AUX 1