599477
62
Zoom out
Zoom in
Previous page
1/78
Next page
F11/F01 Owner’s Manual
62
ENGLISH
Keyboard Stand Assembly
2 Install the rear panels (left and right).
1 Attach two short screws (6 ×
14mm) to each edge of the
rear panel (center) using
your fingers so that the
screw threads project about
10mm from the surface.
Make sure that the screws
will not loosen and fall out
of the holes.
2 Make sure that the screws you finger-tightened
in Step 1 have not loosened. Then position the
handhold of the rear (left) panel toward the
rear, and hook the bracket of the rear (left)
panel onto the projecting screws as shown in
the illustration 2. When doing so, be careful
that the bracket does not scratch the rear panel
(center).
3 Align the holes located under the handhold on
the rear panel (left) with the holes on the main
unit, then tighten two long screws (6 × 45mm)
to secure the panel to the unit.
4 Lightly tighten two short screws (6 × 14mm)
into the bracket on the bottom of the unit to
secure the panel to the unit.
5 Follow the same steps to install the rear panel
(right).
3 Fasten the rear panels securely.
Tighten the screws securely in the order shown in
the illustration. Be careful not to permit mis-
aligned levels on the front surface, or a gap on the
top surface of rear panels (center, left, and right).
4 Attach the fall-prevention bracket.
Align the second and fourth holes on the fall-pre-
vention bracket with the bracket holes on the bot-
tom of the unit, then secure the bracket using two
short screws (6 × 14mm).
5 Set the voltage selector and connect the
power cord.
Insert the AC power cord plug into the [AC
INLET] connector on the rear of the unit.
Voltage Selector
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some areas.
To set the selector for 110V, 127V, 220V or 240V main
voltages, use a “minus screwdriver to rotate the selector
dial so that the correct voltage for your region appears
next to the pointer on the panel. The voltage selector is
set at 240V when the unit is initially shipped. After the
proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug
adaptor may be also provided in some areas to match the
pin configuration of the AC wall outlets in your area.
WARNING
An improper voltage setting can cause serious
damage to the instrument or result in improper
operation.
10mm
3
4
2
Position the bracket to
the rear of the rear
panel (left).
22
3
3
11
Edges must
be flush.
Do not allow
a gap.
(F11) (F01)
Voltage
Selector
Voltage
Selector
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha F11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha F11 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha F11

Yamaha F11 Quick start guide - English - 4 pages

Yamaha F11 User Manual - English - 4 pages

Yamaha F11 User Manual - English, German - 28 pages

Yamaha F11 User Manual - German - 176 pages

Yamaha F11 User Manual - German - 4 pages

Yamaha F11 User Manual - Dutch - 80 pages

Yamaha F11 User Manual - Danish - 80 pages

Yamaha F11 User Manual - French - 78 pages

Yamaha F11 User Manual - French - 4 pages

Yamaha F11 User Manual - French - 28 pages

Yamaha F11 User Manual - Italian - 80 pages

Yamaha F11 User Manual - Polish - 80 pages

Yamaha F11 User Manual - Portuguese - 80 pages

Yamaha F11 User Manual - Swedish - 80 pages

Yamaha F11 User Manual - Spanish - 28 pages

Yamaha F11 User Manual - Spanish - 4 pages

Yamaha F11 User Manual - Spanish - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info