599464
38
Zoom out
Zoom in
Previous page
1/52
Next page
Appendix
F02 Owner’s Manual
38
To turn off the message, press [-/NO].
Uoc
Communication with the USB flash memory has been shut down because of overcurrent to the USB flash
memory. Disconnect the USB flash memory from the [USB TO DEVICE] terminal, then turn on the power of
the instrument again.
UU1
Communication with the USB flash memory has failed. Remove the USB flash memory and make the
connection again. If the message appears even when the USB flash memory is connected properly, the USB flash
memory may be damaged.
UU2
This USB flash memory is not supported on this instrument, or too many USB flash memories may have been
connected. Refer to “Handling a USB Flash Memory” (page 28) for information on the USB flash memory
connection.
Troubleshooting
Problem Possible Cause and Solution
The instrument does not turn on. The instrument has not been plugged in properly. Securely insert the female
plug into the socket on the instrument, and the male plug into a proper AC
outlet (page 13).
A click or pop is heard when the power is turned on
or off.
This is normal when electrical current is being applied to the instrument.
Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in
close proximity to this instrument. Turn off the mobile phone, or move it
further away from this instrument
Noise is heard from the instrument’s speakers or
headphones when using the instrument with the
application on iPhone/iPad.
When you use the instrument along with the application on your iPhone/
iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/
iPad in order to avoid noise caused by communication.
The overall volume is low, or no sound is heard. The volume is set too low. Set it to an appropriate level using the [VOLUME]
slider (page 14).
Make sure a pair of headphones is not connected to the headphones jack
(page 13).
Make sure that Local Control is On (page 34).
The damper pedal does not function as expected. The damper pedal was pressed when the power was turned on. This is not a
malfunction; release the pedal and press it again to reset the function.
Sound input to the AUX IN jacks is interrupted. The output volume of the external device connected to this instrument is too
low, resulting in the sound being cut off via the Noise Gate after it is input to
this instrument.
Increase the output volume of the external device. The volume level
reproduced via this instruments speakers can be adjusted by using the
[VOLUME] slider.
Set the Noise Gate to off (page 33).
The USB flash memory has hung up (stopped). Refer to the Message List (page 37) in case a message is displayed. If this
happens without any messages, the USB flash memory may be damaged.
Message Meaning
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha F02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha F02 in the language / languages: English as an attachment in your email.

The manual is 7,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha F02

Yamaha F02 User Manual - English - 4 pages

Yamaha F02 User Manual - English - 14 pages

Yamaha F02 User Manual - English - 7 pages

Yamaha F02 User Manual - English - 15 pages

Yamaha F02 User Manual - German - 4 pages

Yamaha F02 User Manual - German - 52 pages

Yamaha F02 User Manual - German - 15 pages

Yamaha F02 User Manual - Dutch - 52 pages

Yamaha F02 User Manual - Dutch - 15 pages

Yamaha F02 User Manual - Danish - 52 pages

Yamaha F02 User Manual - Danish - 15 pages

Yamaha F02 User Manual - French - 4 pages

Yamaha F02 User Manual - French - 52 pages

Yamaha F02 User Manual - French - 15 pages

Yamaha F02 User Manual - Italian - 52 pages

Yamaha F02 User Manual - Italian - 15 pages

Yamaha F02 User Manual - Polish - 52 pages

Yamaha F02 User Manual - Polish - 15 pages

Yamaha F02 User Manual - Portuguese - 52 pages

Yamaha F02 User Manual - Portuguese - 15 pages

Yamaha F02 User Manual - Swedish - 52 pages

Yamaha F02 User Manual - Swedish - 15 pages

Yamaha F02 User Manual - Turkish - 52 pages

Yamaha F02 User Manual - Spanish - 14 pages

Yamaha F02 User Manual - Spanish - 4 pages

Yamaha F02 User Manual - Spanish - 15 pages

Yamaha F02 User Manual - Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info