48736

Yamaha EX5 Manual

274
Zoom out
Zoom in
Previous page
1/304
Next page
Utility Mode
274
MTC (MIDI Time Code) is a Time Code that controls
the timing of multiple audio devices through MIDI
cables. The code is made up of “ hour, minute, second,
and frame.” The EX itself cannot output MTC and
therefore to play in sync using MTC it is necessary to
use a device such as the Yamaha MD4 that is capable of
outputting MTC.
MMC (MIDI Machine Control) is a standard used in
controlling devices such as a multi-track recorder using
a MIDI sequencer. This means that when the
operations such as start/stop, fast forward/rewind are
activated on a sequencer, the multi-track recorder (that
is receiving signals from the sequencer) will
automatically move according to the corresponding
operation. Therefore the multi-track recorder will keeps
the same location as that of the sequencer when played
back. This setting should be used when the EX is being
synced as a slave for performance, or when creating
music using an external device corresponding to the
MMC standard such as a multi-track recorder.
❏ Settings: internal, MIDI-A, MTC MIDI-A, MIDI-B, MTC
MIDI-B
“MIDI B” and “MTC MIDI-B” are available only with
the EX5.
■ MIDI Ctrl In (MIDI Control In)
Sets whether or not the MIDI clock signals (start,
stop, continue start, song position pointer) are
received.
❏ Settings: on (receive), off (not receive)
■ MIDI Ctrl Out (MIDI Control Out)
Sets whether or not the MIDI clock signals (start,
stop, continue start, song position pointer) are sent.
❏ Settings: on (send), off (not send)
■ MTC Start Offset (MTC Start Offset)
Sets the starting location for the internal sequencer
in the following units,”hour, minute, second, and
frame.” The internal sequencer will start at the
predetermined timing when the MTC is received.
❏ Settings: 0~23 for Hour, 0~59 for Minute and Second,
0~29 for Frame
[F4]: MIDI (MIDI Setup)
The MIDI Setup allows you to make settings related to
MIDI for the entire keyboard.
■ Global Recv Ch (Global Receive Channel)
Sets the MIDI receive channel for controlling the EX
with an external device such as a MIDI sequencer or
computer.
❏ Settings: 1~16, omn (omni: all channels)
■ MIDI Trns Ch
Sets which MIDI channel the operations on the
keyboard and/or controllers will be sent on.
❏ Settings: Ch1~Ch16
■ MIDI Echo Back
Outputs from MIDI OUT all data that is received at
MIDI IN(A).
❏ Settings: on (output), off (not output)
When an external MIDI device’s MIDI IN/OUT are
connected to the EX’s MIDI OUT/IN, this setting
should be set to “Off.”
In the case of EX5, this setting is effective only for the
MIDI IN-A.
■ Receive GM On
Sets whether or not the GM On is received. When
set to “enable,” GM On message can be received.
❏ Settings: disable (not receive GM On), enable (receive GM
On)
■ Receive Pgm Chng (Receive Program Change)
Sets whether or not the EX receives program change
messages from an external device. When “ignore
bank select” is selected, EX5/5R/7 receives the
program change message but ignores the bank select
message from an external device.
❏ Settings: on, ignore bank select, off (not receive)
When sequence data is loaded from an external device
or a floppy disk, this setting should be set to “on.”
Utility/E/qx 6/12/98 7:46 PM Page 274
… 274 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha EX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha EX5 in the language / languages: English as an attachment in your email.

The manual is 7,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha EX5

Yamaha EX5 User Manual - German - 302 pages

Yamaha EX5 User Manual - Dutch - 302 pages

Yamaha EX5 User Manual - French - 302 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info