48736

Yamaha EX5 Manual

263
Zoom out
Zoom in
Previous page
1/304
Next page
Disk Mode
263
6 Press [ENTER].
The following pop-up menu will appear, prompting
confirmation of the operation.
7 Press [YES] (INC) to execute the operation.
Press [NO] to cancel the job.
When the operation is being executed, “Executing...”
will be displayed . When the operation is completed
“Complete!” will be momentarily displayed.
8 When you have completed operations, press EXIT
(the number of times will vary) to exit the Disk
mode.
You can also exit the Disk mode by pressing another
Mode key.
[F1]: SAVE (File Save)
This operation saves the file you have created to the
disk.
To save data to floppy disk, it is first necessary to format
(initialize) the disk (page 269).
To name a newly saved file, press [F7]: NAME to
display the Name screen, and you can name the file (a
maximum of eight characters). For information on how
to name files, see below.
To write over already existing file names, it is
convenient to press [F8]: DIR and display the Directory
screen.
Pressing [F2] or [F3] key will display the disk files (on
the screen) in the order they were saved or in the
alphabetical order. You can search the file you need
quickly using these functions.
For information on the selectable types of data, see page
260.
When the size of the file is larger than the available space
on the floppy disk, “Disk Full” message will be displayed .
In this case, you can either delete unnecessary files to
create more available memory on the floppy disk, or start
the save operation once more with a different disk.
When you try to save a file which file name already
exists,” Overwrite? Are you sure?” confirmation message
will be displayed.
Take note that mistaken operations will erase
important data from your disk permanently.
Setting a File Name
1 Press [F7] and the NAME screen will be displayed.
2 Use [INC]/[DEC] or Data Dial to select a number,
letter, or symbol.
3 Move the cursor and select the next character.
4 Repeat the above steps 2 and 3 to set the song
file name.
You can also enter numbers, letters, or symbols
using the numeric keypad. Several letters or symbols
are assigned to each key (available letters or symbols
are printed below each key). For example, each time
the 0 key is pressed, the available number and
letters are displayed in the following order:
0→A→B→C. SPACE (one space) is assigned to
[ENTER] key. You can also move through the input
locations (numbers, letters, and symbols) using the
cursor key.
Available numbers and letters:
Shown in the above illustration.
Lower case letters are not available. Setting a name
is based on MS-DOS specifications. If you use a
letter that is not included in MS-DOS, “_”
(underline bar) is automatically located in place of
the unrecognizable letter that was entered.
[F1]: ALL (All Data)
Saves all of the data in the internal memory as a single
file.
❏ Settings:
File number (destination)
Device name/directory (destination)
When there is only one directory layer, the disk
directory indication will not be displayed.
Device name/directory (destination)
File type (source)
File number/name (destination)
Disk/E/qx 5/21/98 11:53 AM Page 263
… 263 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha EX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha EX5 in the language / languages: English as an attachment in your email.

The manual is 7,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha EX5

Yamaha EX5 User Manual - German - 302 pages

Yamaha EX5 User Manual - Dutch - 302 pages

Yamaha EX5 User Manual - French - 302 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info