48736

Yamaha EX5 Manual

181
Zoom out
Zoom in
Previous page
1/304
Next page
Sample Mode
181
■ Fraction
Finely adjusts the length of the loop. For example,
when the loop is set to 100, and Loop Fraction is set
to 1, the loop becomes 100 points and 1/64 point in
length.
❏ Settings: 0~63
■ Loop End
Sets the End point of the loop playback within the
range of the entire sample. As seen in the next
diagram, the End point can be set to remove
unwanted noise that exists after that point in the
sample.
❏ Settings: Differs depending on the sample length
About the Loop Lock Function
Changing the Start point or Top point may affect the
loop length you have set. Thus, you may
inadvertently change the loop length during editing.
If you don’t want to change the loop length, you can
fix it by pressing the [F4] (LP. LOCK) key. Pressing
it again cancels the Loop Lock function.
[F7]: LOOP
Here you can grasp the over all wave visually. In the
right half of the screen, the Start, End and Top points
are emphasized so that you can accurately set the Start
point, and the Top and End loop playback points.
The parameters here correspond to the ones in the
PARAM (Parameter) display. If you change the values for
some parameters here, the changes are mirrored in the
related parameters in the PARAM, and vice versa.
The following parameters are the same as the ones in
the PARAM display. For more information on the
details of each parameter, see page 179.
Start point
Data end
Loop End
Noise
Necessary portion
■ Fraction (Loop Fraction)
Sets the Loop Fraction. This is the same as in the
PARAM display.
❏ Settings: 0~63
■ START (Start Point)
Sets the Start point for the sample playback.
■ TOP
Sets the Top point of the loop playback (the point
where the loop begins) within the range of the entire
sample.
■ LOOP
Displays and sets the length from the Top point to
the End point. As this value moves, the End point
value will increase or decrease accordingly.
■ END (End Point)
Sets the End point of the loop playback within the
range of the entire sample.
■ Wave Display
Displays an image of the over all sample wave.
Waves for Start/Top/End Points and Magnifying Function
In the right half of the screen, waves for the
Start/Top/End points are displayed. Pressing [F3]
key allows you to magnify the three points for fine
adjustment. Each press changes the magnification
from 8, 4, 2, to 1. Since the End point is followed by
the Top point, you can visually check the point of
loop connection.
Sample/E/qx 5/21/98 11:39 AM Page 181
… 181 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha EX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha EX5 in the language / languages: English as an attachment in your email.

The manual is 7,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha EX5

Yamaha EX5 User Manual - German - 302 pages

Yamaha EX5 User Manual - Dutch - 302 pages

Yamaha EX5 User Manual - French - 302 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info