48744
24
Zoom out
Zoom in
Previous page
1/300
Next page
Rear Panel
24 Owner’s Manual
The Controls & Connectors
1POWER Switch Page 43
Press to turn power ON or OFF.
2AC INLET (AC Power Cord Socket) Page 26
Be sure to plug the AC power cord into this socket before
plugging the power cord into an AC outlet.
Use only the AC power cord supplied with this instrument.
If the supplied cord is lost or damaged and needs to be
replaced, contact your Yamaha dealer.
The use of an inappropriate replacement can pose a fire
and shock hazard!
3mLAN expansion board (mLAN16E) or I/O
expansion board (AIEB2) cover Page 25
Either the mLAN expansion board (mLAN16E) or the I/O
expansion board (AIEB2) sold separately can be installed
to this instrument. With the mLAN16E board, you can
conveniently and easily hook up your MOTIF ES to other
mLAN compatible instruments or devices.
The AIEB2 board gives you additional digital I/O options,
featuring both optical and coaxial connectors. Moreover,
the board also includes three stereo ASSIGNABLE
OUTPUT pairs (six analog jacks).
4USB connectors Page 29
This instrument is equipped with two types of USB
connectors on the rear panel – USB TO HOST and USB
TO DEVICE. The USB TO HOST connector is used to
connect this instrument to the computer via the USB
cable. The USB connection between the instrument and
the computer can only be used for transfer of MIDI data.
No audio data can be transferred via USB. The USB TO
DEVICE connector is used to connect this instrument to a
USB storage device (hard disk drive, CD-ROM drive, MO
drive, flash disk, etc.) via the USB cable. This lets you
save the data created on this instrument to the external
USB storage device and load the data from the external
USB storage device to the instrument. Save/Load
operations can be performed in the File mode.
nFor details about USB, see Page 29.
5MIDI IN/OUT/THRU connectors Page 34
MIDI IN is for receiving control or performance data from
another MIDI device, such as an external sequencer.
MIDI THRU is simply for redirecting any received MIDI
data (via MIDI IN) to connected devices, allowing
convenient chaining of additional MIDI instruments.
MIDI OUT is for transmitting all control, performance and
playback data from the MOTIF to another MIDI device,
such as an external sequencer.
6BREATH Controller Jack Page 42
Connect an optional Yamaha BC3 Breath Controller here
for expressive breath control capability.
7FOOT SWITCH jacks Page 42
For connection of optional FC4 or FC5 Footswitches.
When connected to the SUSTAIN jack, the Footswitch
controls sustain. When connected to ASSIGNABLE, it can
control one of various different assignable functions.
8FOOT CONTROLLER jacks Page 42
For connection of optional foot controllers (FC7, etc.).
Each jack lets you continuously control one of various
different assignable functions – such as volume, tone,
pitch, or other aspects of the sound.
9ASSIGNABLE OUT L and R jacks Page 31
Line level audio signals are output from this instrument via
these phone jacks (1/4" mono phone plug).
These outputs are independent of the main output (at the
L/MONO and R jacks below), and can be freely assigned
to any of the Drum Voice keys or the Parts. This lets you
route specific Voices or sounds for processing with a
favorite outboard effect unit.
The parts which can be assigned to these jacks are as
follows:
Drum Voice key to which the drum/percussion
instrument is assigned Page 203
Any part of a Performance* Page 218
Any part of a Song* Page 235
Any part of a Pattern* Page 235
* Including the Audio Input part
)OUTPUT L/MONO and R jacks Page 31
Line level audio signals are output via these phone jacks.
For monophonic output, use just the L/MONO jack.
!PHONES jack Page 31
For connection to a pair of stereo headphones.
@A/D INPUT jacks Page 33
External audio signals can be input via these phone jacks
(1/4" mono phone plug).
Various devices such as microphone, guitar, bass, CD
player, synthesizer can be connected to these jacks and
their audio input signal can be sounded as the AUDIO IN
part of the Performance, Song, or Pattern.
In the Sampling mode, these jacks are used for capturing
audio data as samples. For stereo signals (such as from
audio equipment), use both jacks. For mono signals
(such as from a microphone or guitar), use only the L jack.
USB
USB is an abbreviation for Universal Serial Bus. It is a serial
interface for connecting a computer with peripheral devices,
and enables much faster data transfer compared to
conventional serial port connections.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha ES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha ES8 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha ES8

Yamaha ES8 User Manual - German - 300 pages

Yamaha ES8 User Manual - Dutch - 300 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info