484104

Yamaha EMX 512 Manual

31
Zoom out
Zoom in
Previous page
1/36
Next page
Troubleshooting
EMX512SC/EMX312SC/EMX212S
31
Troubleshooting
■
Power doesn’t come on.
❑
Be sure that you are using the supplied power cord, and that it is correctly
connected to the AC IN connector and plugged into a working power out-
let.
■
Power suddenly went off.
❑
Check whether the vents at the sides and rear of the unit are blocked.
The EMX unit may overheat if the vents are blocked. If the unit overheats,
the power may automatically go off. Wait for the unit to cool down, and
then turn the power back on.
■
Sound suddenly
stopped.
❑
Check whether the vents at the sides and rear of the unit are blocked.
The EMX unit may overheat if the vents are blocked. If the unit overheats,
it may cut off the output to the internal amp until things cool down.
■
No sound.
❑
Are microphones, external devices, and speakers connected correctly?
❑
Are the channel LEVEL knobs and the two MASTER knobs set to appro-
priate levels?
❑
Is the POWER AMP switch set correctly?
When outputting a stereo signal, set it to the up (MAIN L/R) position.
❑
Check that the speaker cables are not shorted.
❑
If the above checks do not identify the problem, call Yamaha for service.
(Refer to the end of this manual for a list of Yamaha dealers.)
■
Sound is faint, distorted,
or noisy.
❑
Check that the channel LEVEL knobs and the two MASTER knobs are set
appropriately.
❑
Check that the LINE/MIC switches on channels 1 to 4 are set correctly.
❑
On channels 1 to 4, be sure that you have not connected to both INPUT A
and INPUT B. On each of these channels you may use one input or the
other, but not both.
❑
Is the input signal from the connected device set to an appropriate level?
■
An FCL lamp comes
even though there is no
howling on the channel.
❑
Input of a continuous sound (from a CD player or other such source) may
cause the lamp to come on even in the absence of howling.
■
Can’t hear the internal
digital effect.
❑
Check that the EFFECT knob on each channel is correctly adjusted.
❑
Be sure that the internal effector’s ON switch is turned on.
❑
Be sure that the EFFECT RETURN knobs in the MAIN and MONITOR
sections are correctly adjusted.
■
The sound from the
speakers seems dull.
I want a more forceful
sound.
❑
Try turning on the YS Processing switch.
❑
Adjust the equalizers (HIGH, MID, and LOW knobs) on each channel.
❑
Adjust the graphic equalizers.
■
I want spoken words to
be heard more clearly.
❑
Be sure that the YS Processing switch is turned off.
❑
Adjusting the equalizers (HIGH, MID, and LOW knobs) on each channel.
❑
Adjusting the graphic equalizers.
■
I want to listen to moni-
tor output.
❑
Connected a powered speaker to the MONITOR OUT jack. Then adjust
the MONITOR OUT signal by adjusting the channel MONITOR knobs and
the MONITOR section’s MASTER knob.
❑
If you want to send the monitor signal to SPEAKERS jacks B1 and B2, set
the POWER AMP switch to the down position (to MAIN(L+R) / MON).
Note that in this case the B jacks will output the monitor signal, and the A
jacks will output a mix of the MAIN L and MAIN R signals.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha EMX 512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha EMX 512 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info