136637
19
Zoom out
Zoom in
Previous page
1/20
Next page
19
RQT6575
Reference
Go to Display in the SETUP menus, and select On for On-Screen Messages.
Press [3, 4] while the rightmost icon is highlighted to move them.
Go to Disc in the SETUP menus, and select the preferred language for Menus.
16
13
16
No on-screen display.
GUI screens not displayed or
only partially displayed on the
television.
The discs menu is displayed in
a different language.
Sound Page
4, 5
15
17
No sound.
Distorted sound.
Piercing noise comes from the
speakers.
Check the connections.
Check the volume on the equipment you have connected.
Ensure that the input settings for the television and stereo system are correct.
Turn ADVANCED SURROUND off if it causes distortion.
If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,
ensure you have selected the correct settings for Dolby Digital, DTS Digital Surround and
MPEG
§
in the SETUP menus Audio menu.
§
Not available in Asia.
Unit displays
You inserted a disc the unit cannot play; insert one it can.
Disc is dirty. Wipe the disc clean.
Trouble is likely to have occurred. The number following H depends on the status of the unit.
Reset procedure:
Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON. Alternatively,
press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC power cable,
and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified service person.
You havent inserted a disc; insert one.
You havent inserted the disc correctly; insert it correctly.
7
8
NO PLAY
CHECK DISC
H∑∑
∑∑ stands for a number.
NO DISC
Television displays
Placement
Set the unit up on an even surface away from direct sunlight, high tem-
peratures, high humidity, and excessive vibration. These conditions can
damage the cabinet and other components, thereby shortening the units
service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and
cause a fire.
Do not use a DC power source. Check the source carefully when setting
the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains
lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock
or malfunction.
Do not let liquids get into the unit. This can cause electric shock or mal-
function. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted, indi-
cators fail to light, smoke appears, or any other problem that is not covered
in these instructions occurs, disconnect the AC mains lead and contact
your dealer or an authorized service center. Electric shock or damage to
the unit can occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Extend operating life by disconnecting the unit from the power source if it
is not to be used for a long time.
Maintenance
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
Do not place the unit
on amplifiers or equip-
ment that may become
hot.
The heat can damage the unit.
Safety precautions
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha dvd s80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha dvd s80 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha dvd s80

Yamaha dvd s80 User Manual - German - 20 pages

Yamaha dvd s80 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info