139099
44
Zoom out
Zoom in
Previous page
1/48
Next page
44
Troubleshooting
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple mea-
sures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and con-
tact your authorized YAMAHA dealer or service center for help.
Play does not commence even when title
is selected.
Confirm the “Ratings” setting.
Symptom [DVD] Remedy
Symptom (Common) Remedy
No power.
Power is automatically switched to the
standby mode.
ÁPlay fails to start even when PLAY is
pressed.
ÁPlay commences but then stops
immediately.
No picture.
ÁNo sound.
ÁDistorted sound.
Picture is distorted during rapid advance
or rapid reverse.
No rapid advance (or rapid reverse) play.
No 4:3 (16:9) picture.
No on-screen display.
No surround sound.
No operations can be performed with the
remote control.
No key operation (by the unit and/or the
remote control) is effective.
GUI Screen not displayed or only partially
displayed on the TV Screen.
Insert the AC mains lead securely into the power outlet.
The power is automatically switched to the standby mode after approx.
30 minutes have elapsed in the stop mode (auto turn-off function). Turn the power
back on.
ÁCondensation has formed: wait about 1 to 2 hours to allow the player to dry out.
ÁThis player cannot play discs other than DVDs, Video CDs and CDs.
ÁThe disc may be dirty and may require cleaning.
ÁEnsure that the disc is installed with the label side up.
ÁEnsure that the equipment is connected properly.
ÁEnsure that the input setting for the TV is an Audio/Video (AV) position, e.g. AV1,
AV2.
ÁEnsure that the equipment is connected properly.
ÁEnsure that the input settings for the TV and stereo system are proper.
The picture will be somewhat distorted at times: this is normal.
Some discs may have sections which prohibit rapid advance (or rapid reverse).
Choose the correct setup TV Aspect item which matches the TV set used.
The “Off” setting is selected for On-Screen Messages: select “On”.
Choose the correct setup at the Speaker setting which matches your stereo
system.
ÁCheck the batteries are installed with the correct polarities (o and p).
ÁThe batteries are depleted: replace them with new ones.
ÁPoint the remote control unit at the remote control sensor and operate.
ÁOperate the remote control unit at a distance of not more than 7 meters from the
remote control sensor.
ÁRemove the obstacles between the remote control unit and remote control sensor.
Switch the power to the standby mode and then return to ON. Alternatively, switch
the power to the standby mode, disconnect the AC mains lead and then re-connect
it. (The player may not be operating properly due to lightning, static electricity or
some other external factor.)
Select the appropriate TV screen type by consulting the operation manual of the TV.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha dvd s 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha dvd s 700 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info