50913
71
Zoom out
Zoom in
Previous page
1/362
Next page
69
English
SYSTEM OPTIONS
ADVANCED
OPERATION
Presence (Presence speakers)
Choices: None, Yes
Select None if you do not have presence speakers. This
unit directs all presence channel signals to the front left
and right speakers.
Select Yes if you have presence speakers.
When Zone2 Amplifier is set to Internal (see page 78), Presence
is automatically set to None.
Cross Over (Cross over)
Use this feature to select a cross-over (cut-off) frequency
for all low-frequency signals. All frequencies below the
selected frequency are sent to the subwoofer.
Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz,
110Hz, 120Hz, 160Hz, 200Hz
Select 80Hz (THX) when using a THX system.
Speaker Level (Speaker level)
Use these settings to manually balance the speaker levels
between the front left speakers and each speaker selected
in Speaker Set (see page 67).
Manual Setup > Basic > Speaker Level
Choices: –10.0 dB to +10.0 dB
Front L adjusts the balance of the front left speaker.
Front R adjusts the balance of the front right speaker.
Center adjusts the balance of the center speaker.
Surround L adjusts the balance of the surround left
speaker.
Surround R adjusts the balance of the surround right
speaker.
Surround Back L adjusts the balance of the surround
back left speaker.
Surround Back R adjusts the balance of the
surround back right speaker.
Presence L adjusts the balance of the front left and
presence left speakers.
Presence R adjusts the balance of the front left and
presence right speakers.
Subwoofer L adjusts the balance of the left
subwoofer.
Subwoofer R adjusts the balance of the right
subwoofer when two subwoofers are connected.
y
To calibrate correctly to THX reference levels, use the internal
pink noise generator (see page 54).
You cannot adjust the level of channels set to None in Speaker
Set.
If you are only using one surround back speaker, connect it to
the SURROUND BACK (SINGLE) jack, and adjust the balance
in Surround Back L.
Note
80Hz
(
THX
)
Notes
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z9 in the language / languages: German, French as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z9

Yamaha DSP-Z9 User Manual - English - 122 pages

Yamaha DSP-Z9 User Manual - Dutch, Italian, Swedish, Spanish - 482 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info