50913
111
Zoom out
Zoom in
Previous page
1/122
Next page
109
English
TROUBLESHOOTING
ADDITIONAL
INFORMATION
Problem Cause Remedy
Refer to
page
The sound suddenly
goes off.
The protection circuitry has been activated
due to a short circuit, etc.
Check that the correct impedance is set.
28
Check that the speaker wires are not touching each
other and then turn this unit back on.
The sleep timer has turned the unit off. Turn on the power, and playback the source again.
The sound is muted. Press MUTE or any operation button on this unit to
cancel mute and adjust the volume.
38
The speaker on one
side only can be
heard.
The cable connections are incorrect. Connect the cables properly. If the problem persists,
the cables may be defective.
13
The balance settings are incorrect. Adjust the Speaker Level settings.
69
No sound from the
effect speakers.
The sound field programs are turned off. Press STRAIGHT/EFFECT to turn them on.
42
A Dolby Surround, Dolby Digital or DTS
decoding DSP program is being used with
material not encoded with Dolby
Surround, Dolby Digital or DTS.
Select another sound field program.
39
A sampling digital signal of 96 kHz or
higher is being input to this unit.
No sound from the
center speaker.
The output level of the center speaker is
set to minimum.
Raise the level of the center speaker.
69
“Center” is set to None in Speaker Set. Select the appropriate mode for your center speaker.
67
One of the Hi-Fi DSP programs (except
for 9ch Stereo) has been selected.
Select another sound field program.
39
No sound from the
surround speakers.
The output level of the surround speakers
is set to minimum.
Raise the output level of the surround speakers.
69
“Surround” is set to None in Speaker Set. Select the appropriate speaker mode for the surround
L/R speakers.
68
A monaural source is being played with
STRAIGHT/EFFECT set to STRAIGHT.
Press STRAIGHT/EFFECT to turn on the sound
fields. Then select another sound field program.
No sound from the
surround back
speakers.
“Surround” is set to None in Speaker Set. If the speaker mode for the surround L/R speakers is
set to None, the speaker mode for the surround back
speaker is automatically set to None. Select the
appropriate speaker mode for the surround L/R
speaker mode.
68
“Surround Back” is set to None in Speaker
Set.
Select Large or Small.
68
No sound from the
subwoofer.
“Bass Out” is set to Front in Subwoofer
Set when a Dolby Digital or DTS signal is
being played.
Select SWFR or Both.
67
“Bass Out” is set to SWFR or Front in
Subwoofer Set when a 2-channel source is
being played.
Select Both.
67
The source does not contain low bass
signals.
00EN.00_DSPZ9_GB.book Page 109 Thursday, November 13, 2003 10:55 AM
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z9 in the language / languages: English as an attachment in your email.

The manual is 12,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z9

Yamaha DSP-Z9 User Manual - German - 362 pages

Yamaha DSP-Z9 User Manual - Dutch - 482 pages

Yamaha DSP-Z9 User Manual - French - 362 pages

Yamaha DSP-Z9 User Manual - Italian, Swedish, Spanish - 482 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info