50913
101
Zoom out
Zoom in
Previous page
1/122
Next page
99
English
USING i.LINK
ADVANCED
OPERATION
Information (Information)
Use this feature to display the following information:
operation status of registered i.LINK devices, registered
i.LINK devices that have been deleted, and i.LINK signals
that are currently being received.
i.LINK Select > Information >
Choices: Details, Delete, Protect, i.LINK Status
Select Details to display the following information
about the selected i.LINK component.
Vendor: Displays the name of the manufacturer for
your i.LINK component.
Model: Displays the model number for your
i.LINK component.
Active (connected) or Non Active (not
connected): Displays depending on whether your
i.LINK component is connected.
Audio (for audio signals) or Non Audio (for non-
audio signals): Displays depending on whether your
i.LINK component supports audio signal playback.
Assign: Displays the name of the input assigned to
the selected i.LINK component.
Select Delete to delete the selected i.LINK component
from the registered components list. To delete, press
ENTER.
y
To delete all of the i.LINK components from the registered
components list, set “All Delete” to
Yes in the i.LINK Status
screen and press
ENTER.
Select Protect to prevent the selected component from
accidentally being deleted.
Select i.LINK Status to display the number of i.LINK
components registered, the number of i.LINK components
currently connected to this unit, and the number of i.LINK
components that can be deleted. If an error occurs while using
an i.LINK component connected to this unit using an IEEE1394
cable, the contents of the error are displayed here.
You cannot delete an i.LINK component while it is connected to
this unit.
Select (Select)
Use this feature to select which registered i.LINK
component’s audio signal will be selected for playback.
i.LINK Select > Select
Select the name of the desired component and press
ENTER to switch the input. When you select the desired
component, its manufacturer and model information
appear along with its input assignment at the right of the
screen.
Plug & Play (Plug and play)
Use this feature to select whether you want the unit to
automatically switch to the input assign mode when a new
i.LINK component is connected.
i.LINK Select > Plug & Play
Choices: ON, OFF
Select ON to display the input assign inquiry message
and enter the input assign mode when a new i.LINK
component is connected.
Select OFF if you want MULTI CH INPUT to be
assigned as the input without entering the input assign
function when a new i.LINK component is connected.
Input Assign (Input assign)
Use this feature if you want to change the input
assignment of a registered i.LINK component. You can
select to assign the i.LINK component to any of the
various inputs (PHONO to V-AUX) or MULTI CH
INPUT.
i.LINK Select > Input Assign >
Choices: PHONO, TUNER, CD, CD-R, MD/TAPE, DVD,
DTV/LD, CABLE, SAT, VCR 1, VCR 2, DVR, V-AUX,
MULTI CH IN
1 Press k/n repeatedly to select the i.LINK
component you want to assign, then press
h.
2 Press k/n repeatedly to select the input for
the i.LINK component, then press ENTER.
Auto Play (Auto Play)
Use this feature to turn on/off automatic playback when an
i.LINK component is selected using INPUT SELECTOR,
or select whether you want the input to switch
automatically when an input stream from a connected
i.LINK component is detected.
i.LINK Select > Auto Play
Choices: Z9
Player, Z9 Player, Z9 Player,
Z9 × Player
•Select Z9
Player if you want playback to start
automatically on the i.LINK component selected using
INPUT SELECTOR.
•Select Z9 Player if you want this unit to
automatically switch its input to the i.LINK component
which has started playing back.
•Select Z9 Player if you want both playback to start
automatically on the i.LINK component selected using
INPUT SELECTOR, and you want this unit to
automatically switch its input to the i.LINK component
which has started playing back.
•Select Z9
× Player to disable automatic playback for
the i.LINK components. This setting also prevents this
unit from automatically switching its input to the
i.LINK component.
Notes
00EN.00_DSPZ9_GB.book Page 99 Thursday, November 13, 2003 10:55 AM
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z9 in the language / languages: English as an attachment in your email.

The manual is 12,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z9

Yamaha DSP-Z9 User Manual - German - 362 pages

Yamaha DSP-Z9 User Manual - Dutch - 482 pages

Yamaha DSP-Z9 User Manual - French - 362 pages

Yamaha DSP-Z9 User Manual - Italian, Swedish, Spanish - 482 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info