516900
105
Zoom out
Zoom in
Previous page
1/154
Next page
105 En
Remote control features
ADVANCED
OPERATION
You can clear all changes made in each function set, such
as learned functions, macros, renamed control area names
and setup remote control ID.
Clearing function sets
1 Press GSETUP using a ballpoint pen or
similar object.
“SETUP” appears in the display window (4).
2 Press 9k / n repeatedly to select “CLEAR”
and then press 9ENTER.
3 Press 9k / n repeatedly to select the desired
clear mode.
4 Press and hold 9ENTER for about 3
seconds.
When the clearing is successful, “OK” appears in the
display window (4).
“NG” appears in the display window (4) if clearing was
unsuccessful.
“ERROR” appears in the display window (4) if you press a
button not indicated in the respective step, or if you press more
than one button simultaneously.
5 Press GSETUP again to exit from the setup
mode.
Clearing a learned function
1 Press GSETUP using a ballpoint pen or
similar object.
“SETUP” appears in the display window (4).
2 Press 9k / n repeatedly to select “ERASE”
and then press 9ENTER.
3 Set the operation mode selector to
F
SOURCE and then press an input selector
button (3).
If you want to erase the function learned in the AMP
or TV control area, set the operation mode selector to
F
AMP or
F
TV.
4 Press 9ENTER.
“E-KEY” appears in the display window (4).
5 Press and hold the button you want to clear
for about 3 seconds.
If clearing is successful, “OK” appears in the display
window (4).
y
If you continuously want to clear another function, repeat
step 3 through 5.
Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
6 Press GSETUP again to exit from the setup
menu.
“NG” appears in the display window (4) on the remote control
if clearing was unsuccessful.
“ERROR” appears in the display window (4) if you press more
than one button simultaneously.
Clearing configurations
Clear mode Descriptions
L:DVD (etc.)
(L:Three-digit name of the selected control area)
Clears all learned functions the respective
control area. You can change the control area to
be cleared by pressing the desired input selector
button (3) or 5SELECT l / h repeatedly.
L:AMP
Sets all learned functions for controlling the
amplifier functions to the initial factory settings.
Set the operation mode selector to FAMP to
select this clear mode.
L:TV
Clears all learned functions for TV control area.
Set the operation mode selector to FTV to
select this clear mode.
L:ALL
Clears all learned functions.
M:DVD (etc.)
(M:Name of the selected macro button) Clears
the macro programmed for the selected macro
button (page 104). The assigned macro to the
selected macro button reverts to the initial
factory macro. Press the desired macro button if
you want to change the macro button you want to
clear the programmed functions of.
M:ALL
Clears all programmed macros. The assigned
macro to the selected macro button reverts to the
initial factory macro.
RNAME
Set all the name of the control areas to the
default settings.
FCTRY
Set all settings of the remote control to the initial
factory settings.
Notes
Notes
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z7 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z7

Yamaha DSP-Z7 User Manual - German - 154 pages

Yamaha DSP-Z7 User Manual - Dutch - 154 pages

Yamaha DSP-Z7 User Manual - French - 155 pages

Yamaha DSP-Z7 User Manual - Italian - 155 pages

Yamaha DSP-Z7 User Manual - Swedish - 154 pages

Yamaha DSP-Z7 User Manual - Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info