516900
102
Zoom out
Zoom in
Previous page
1/154
Next page
102 En
Remote control features
7 Press
G
SETUP again to exit from the setup
menu.
“ERROR” appears in the display window (4) on the remote
control if you press a button not indicated in the respective step,
or when you press more than one button simultaneously.
This remote control can learn approximately 200 functions.
However, depending on the signals learned, “FULL” may
appear in the display before you program 200 functions. In this
case, clear unnecessary programmed functions to make room
for further learning (page 105).
Learning may not be possible in the following cases:
when the batteries in the remote control for this unit or other
components are weak.
when the remote control is exposed to direct sunlight.
when the function to be programmed is continuous or
uncommon.
You can change the name of the control area (input
source) that appears in the display window (4) on the
remote control.
1 Set the operation mode selector to
FSOURCE and then press an input selector
button (3) to select the desired control area.
2 Press GSETUP using a ballpoint pen or
similar object.
“SETUP” appears in the display window.
3 Press 9k / n repeatedly to select “RNAME”
and then press 9ENTER.
4 Press 9k / n repeatedly to select 3-letter
name or 5-lettered name you want to edit and
then press 9ENTER.
Each control area has both 3-letter name and 5-letter
name. You can rename the 3-letter name and 5-letter
name independently.
5 Edit the name of the control area.
To locate the position to edit, press 9l / h.
To select a character, press 9k / n.
y
Press 9k to change the character in the following order,
or press 9n to go in the reverse order: A to Z, a to z,
0 to 9, space, symbols (–, +, /, :).
6 Press 9ENTER to set the new name.
“OK” appears in the display window (4) on the
remote control if renaming was successful.
y
When you want to rename the another control area, press
the input selector button (3) or 5SELECT l / h
repeatedly to select the desired control area and then press
9ENTER and then carry out the operations of steps 4
through 6.
7 Press
G
SETUP again to exit from the setup
menu.
“ERROR” appears in the display window (4) on the remote
control if you press a button not indicated in the respective step,
or when you press more than one button simultaneously.
Notes
Changing source names in the
display window
BD BD/HD
3-letter name 5-letter name
Note
BD/HD
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z7 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z7

Yamaha DSP-Z7 User Manual - German - 154 pages

Yamaha DSP-Z7 User Manual - Dutch - 154 pages

Yamaha DSP-Z7 User Manual - French - 155 pages

Yamaha DSP-Z7 User Manual - Italian - 155 pages

Yamaha DSP-Z7 User Manual - Swedish - 154 pages

Yamaha DSP-Z7 User Manual - Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info