516900
91
Zoom out
Zoom in
Previous page
1/154
Next page
91 En
ADVANCED
OPERATION
Use this feature to save and recall up to six of your favorite
setting for the main zone. You can also save up to four of
your favorite settings for Zone 2, Zone 3 or Zone 4.
Saving by the
7
SYSTEM MEMORY
buttons
You can save the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding
7
SYSTEM
MEMORY buttons.
Press and hold one of the 7SYSTEM MEMORY
buttons on the remote control for 4 seconds.
“Memory1 SAVE” (example) appears in the front panel
display, and then this unit saves the current system setting
to the corresponding memory number.
y
If system settings are already stored in the selected memory
number, this unit overwrites the old settings.
To save the system settings for Zone 2, Zone 3 or Zone 4, press
HZONE on the remote control repeatedly to select the desired
zone and then press and hold one of the 7SYSTEM
MEMORY buttons for 4 seconds. To save the system settings
for the selected zone, the zone should be turned on.
This unit saves the parameters in the groups you select by using
the GUI menu when you save the parameters by using the
7SYSTEM MEMORY buttons.
You can also use FSYSTEM MEMORY buttons on the front
panel.
Saving by the GUI menu operation
You can save the current system settings stored in
“Memory1” to “Memory6” by using the “System
Memory” menu in the GUI menu.
1 Set the operation mode selector on the
remote control to FAMP and then press
IMENU.
y
If the menu directory other than “Top Menu” (page 67) is
displayed, press and hold IMENU to display the top GUI
menu.
2 Press 9k / n repeatedly to select “Setup”
and then press 9h.
3 Press 9k / n repeatedly to select “System
Memory” and then press 9h.
4 Press 9k / n repeatedly to select the desired
zone and then press 9h.
5 Press 9k / n repeatedly to select “xxx Save”
and then press 9h.
“xxx” indicates the zone you selected in step 4.
6 Press 9k / n repeatedly to select the desired
memory number and then press 9ENTER.
The list of the parameter groups to be saved appears. Available
parameter groups vary depending on the selected zone.
y
If system settings are already stored in the selected memory
number, this unit overwrites the old settings.
To load the system settings with the 7SYSTEM MEMORY
button operation, use one of “Memory1” to “Memory4”.
7 Press 9k / n repeatedly to select the
parameter group and then press 9ENTER
to check or uncheck the box.
Check the boxes for the parameter groups to be saved.
For details on parameters to be saved, see
“Parameters to be saved” (page 92).
8 Press 9k / n / l / h repeatedly to select
“SAVE” and then press 9ENTER to save
the current system settings to the selected
memory number.
y
To cancel the operation, select “CANCEL” and then press
9ENTER.
9 Press IMENU to turn off the GUI menu.
Renaming the stored settings
1 Follow steps 1 to 4 in “Saving by the GUI
menu operation” (page 91).
2 Press 9k / n repeatedly to select “xxx
Rename” and then press 9h.
“xxx” indicates the zone you selected in step 1.
Saving and recalling the system settings (System Memory)
Saving the system settings
4
3
SYSTEM MEMORY
2
1
Main Save
Input/HDMI Out
Audio
Volume
SP Config
Video/Display Set
Others
SAVE
CANCEL
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z7 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z7

Yamaha DSP-Z7 User Manual - German - 154 pages

Yamaha DSP-Z7 User Manual - Dutch - 154 pages

Yamaha DSP-Z7 User Manual - French - 155 pages

Yamaha DSP-Z7 User Manual - Italian - 155 pages

Yamaha DSP-Z7 User Manual - Swedish - 154 pages

Yamaha DSP-Z7 User Manual - Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info