557503

Yamaha DSP-AZ2 Manual

35
Zoom out
Zoom in
Previous page
1/576
Next page
33
English
INTRODUCTION
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
BASIC PLAYBACK
■ Normal Stereo Reproduction
Press STEREO/EFFECT to turn off the sound
effect for normal stereo reproduction.
Press STEREO/EFFECT again to turn the sound
effect back on.
Notes
• If “1B MAIN SP” on the SET MENU is set to “SMALL” and
“1E LFE/BASS OUT” is set to “SWFR”, or “1E LFE/BASS
OUT” is set to “BOTH”, the LFE signals will be output from
the subwoofer.
• If you turn off the sound effect while a Dolby Digital or DTS
signal is being output, the dynamic range of the signal is
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the main speakers.
• The volume may be greatly reduced when you turn off the
sound effect or if you set “11 D-RANGE” on the SET MENU
to MIN. In this case turn on the sound effect.
■ Displaying the information about
the input source
During the stereo reproduction, you can display the
information such as the type, format and sampling
frequency of the signal input from the component
connected to this unit.
(During playback)
1 Set PARAMETER/SET
MENU to PARAMETER.
2 Press k/n to display the information about
the input signal.
Notes
• The DTS 96/24 decoder and the DTS ES decoder cannot be
activated at the same time while playing the DTS 96/24 signal.
When “AUTO” is selected, the DTS 96/24 decoder has
precedence over the DTS ES decoder.
• 6.1-channel playback is not possible even if EX/ES is pressed
in the following cases:
– When “1C REAR L/R SP”is set to “NONE”.
– When the sound effect is turned off.
– When the source connected to the 6CH INPUT jack is
being played.
– When the source being played does not contain rear L/R
channel signals.
– When Dolby Digital KARAOKE source is being played.
– When headphones are connected.
– When “8ch Stereo” is selected.
• When the power of this unit is turned off, the input mode
will be reset to AUTO.
■ Virtual CINEMA DSP
With the Virtual CINEMA DSP, you can enjoy all the
DSP programs without rear speakers. It creates the virtual
speakers to reproduce the natural sound field.
The sound field processing is changed to the Virtual
CINEMA DSP mode according to the selected DSP
program by setting “1C REAR L/R SP” on the SET
MENU to NONE.
Notes
• This unit is not set in the virtual CINEMA DSP mode even if
“1C REAR L/R SP” is set to NONE in the following cases:
– when the 8ch Stereo, DOLBY DIGITAL Normal, Pro Logic
Normal, Pro Logic , DTS Normal or Neo: 6 program is
selected;
– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when using the test tone; or
– when connecting the headphones.
• When over 48 kHz sampling digital signal is being input, this
unit reproduces sound in the virtual CINEMA DSP mode after
converting the sampling frequency to 48 kHz or below.
■ SILENT CINEMA DSP
You can enjoy the powerful sound field as if there were
actual speakers with the SILENT CINEMA DSP. You can
listen to SILENT CINEMA DSP by connecting your
headphones to the PHONES jack while the digital sound
field processor is on. Enjoy all the DSP program using the
headphones. The “SILENT” indicator lights up on the
front panel display. (If the sound effect is off, you listen to
the source with normal stereo reproduction.)
Notes
• When 6CH INPUT is selected as the input source, this unit is
not set in the SILENT CINEMA DSP mode even if the sound
effect is on.
• When over 48 kHz sampling digital signal is being input, this
unit reproduces sound in the CINEMA DSP mode after
converting the sampling frequency to 48 kHz or below.
STEREO
EFFECT
STEREO
EFFECT
Front panel
or
Remote control
PARAMETER
SET MENU
PARAMETER
SET MENU
LEVEL
ON SCREEN
TESTSLEEP
0105DSPAZ2_28-33_EN(GB) 02.8.22, 0:16 PM33
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-AZ2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-AZ2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 11,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info