464179
106
Zoom out
Zoom in
Previous page
1/110
Next page
E-104
Problem
The sound field parameters and
some other settings on this unit
cannot be changed.
This unit does not operate
properly.
“CHECK SP WIRES” appears on
the front panel display.
The sound is degraded when
listening with headphones
connected to a tape deck or CD
player that is connected to this
unit.
There is noise interference from
digital or high-frequency equip-
ment, or this unit.
This unit suddenly turns into the
standby mode.
Cause
“16 MEMORY GUARD” on the SET MENU is set to
“ON”.
The internal microcomputer has been frozen by an
external electric shock (such as lightning or excessive
static electricity) or by a power supply with low
voltage.
Speaker cables are short circuited.
This unit is in the standby mode.
This unit is too close to the digital or high-frequency
equipment.
The internal temperature becomes too high and the
overheat protection circuitry has been activated.
Remedy
Select “OFF” (see page 62).
Disconnect the AC power cord from the outlet and
then plug it in again after about 30 seconds.
Make sure all speaker cables are connected correctly.
Turn on the power of this unit.
Move this unit further away from such equipment.
Wait until this unit cools down and then turn it back
on.
TROUBLESHOOTING
Remote control
Problem
The remote control does not work
nor function properly.
The remote control does not
“learn” new functions.
Cause
Wrong distance or angle.
Direct sunlight or lighting (from an inverter type of
fluorescent lamp, etc.) is striking the remote control
sensor of this unit.
The batteries are weak.
The manufacturer code has not been correctly set.
Even if the manufacturer code is correctly set, there
are some models that do not respond to the remote
control.
The batteries of this remote control and/or the other
remote control are too weak.
The distance between the two remote controls is too
much or too little.
The signal coding or modulation of the other remote
control is not compatible with this remote control.
Memory capacity is full.
Remedy
The remote control will function within a maximum
range of 6 m (20 feet) and no more than 30 degrees
off-axis from the front panel (see page 10).
Reposition this unit.
Replace all batteries with new ones and press RESET.
Set the manufacturer code correctly (see page 66).
Try to set the other codes of the same manufacturer
(see page 66).
Program the necessary functions independently into
the programmable buttons on this unit’s remote
control using the Learn feature.
Replace the batteries.
Place the remote controls at the proper distance (see
page 68).
Learning is not possible.
Further learning is not possible without deleting
unnecessary functions (see page 79).
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-AZ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-AZ1 in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-AZ1

Yamaha DSP-AZ1 User Manual - English - 110 pages

Yamaha DSP-AZ1 User Manual - German - 110 pages

Yamaha DSP-AZ1 User Manual - Dutch - 110 pages

Yamaha DSP-AZ1 User Manual - French - 110 pages

Yamaha DSP-AZ1 User Manual - Italian - 110 pages

Yamaha DSP-AZ1 User Manual - Swedish - 110 pages

Yamaha DSP-AZ1 User Manual - Spanish - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info