557381
25
Zoom out
Zoom in
Previous page
1/473
Next page
English
23
Speaker Output Levels
DSP Test
1
1
After the dsp test is selected, “TEST DSP” appears on the video monitor and
in the front display.
2
2
Adjust VOLUME +/– to hear the test tone. Make an adjustment so that the
output level coming from the Front Effect speakers is the same as that of the
Main speakers.
The test tone is produced alternately from the Front Effect speakers and
Main speakers. The tone is produced for 2.5 seconds each time.
3
3
Adjust the output level of the Front Effect speakers using + and so the
output level coming from the Front Effect speakers is the same as that of the
Main speakers.
The test tone is automatically produced from the Front Effect speakers
while you are adjusting the level.
Notes:
If you cannot hear the test tone, set VOLUME, turn off the power, and check the
speaker cords and hookups.
The test tone can be reproduced separately from the left and right Front Effect
speakers. This is useful when you want to check the hookups to these speakers.
Press h to reproduce the test tone from the left speaker, and press g to reproduce
the tone from the right speaker. (The OSD shows which speaker is reproducing the
tone.)
You cannot adjust the output level of the left and right Front Effect speakers
separately.
You can hear the test tone only from the Right Front Effect speaker by pressing g
and the Left Front Effect speaker by pressing h. You can return to the original
mode by releasing the buttons.
The tonal quality of the speakers can be adjusted using the 5. CENTER GEQ items
in the SET MENU.
If the sound volume of the Front Effect speakers is lower than that of the Main
speakers, even after you have increased the output level up to +10 dB, set the 1G.
MAIN LEVEL item in the SET MENU to “–10dB.” Setting the 1G. MAIN LEVEL
item to “–10dB” decreases the Main speaker output level to about one-third of the
normal level.
After you set the 1G. MAIN LEVEL item in the SET MENU to “–10dB,” repeat
the TEST DOLBY SUR. procedure on the previous page.
If you do not use Front Effect speakers, set the 1F FRNT EFCT SP item in the SET
MENU to “NONE”, and the DSP Front Effect signals will be mixed with the Main
channel signals.
When the headphones are connected to this unit, you cannot select the Dolby
Surround test and the dsp test.
TEST DSP
MAIN
FL
L
RL
C
RC
R
FR
RR
EFFECT LEVEL
FRONT 0dB
TEST DSP
EFFECT LEVEL
FRONT 0dB
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-AX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-AX2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 40,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info