29
English
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 22.
1 Press once or more so that “CENTER” appears on the
display.
2 By continuously pressing the “+” or “–” side of the
TIME/LEVEL button, the level value changes continuously.
The value stops changing momentarily at the preset point
(0 dB).
Control range: MIN, –20 to +10 dB
Notes
●
DSP-A592
This adjustment can be made only when the digital sound
field program DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED is selected, or the “6CH” input source mode is
selected.
DSP-A492
This adjustment can be made only when the digital sound
field program DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED is selected.
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs mentioned
above.
Adjustment of the CENTER LEVEL
Adjustable
Adjustment of the REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 22.
1 Press once or more so that “REAR” appears on the display.
2 By continuously pressing the “+” or “–” side of the
TIME/LEVEL button, the level value changes continuously.
The value stops changing momentarily at the preset point
(0 dB).
Control range: MIN, –20 to +10 dB
Notes
●
DSP-A592
This adjustment can be made only when the built-in digital
sound field processor is on, or the “6CH” input source mode
is selected.
DSP-A492
This adjustment can be made only when the built-in digital
sound field processor is on.
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.