Manual Yamaha DSP-A1092 (page 43 of 71) (English)

549933

Zoom out

Zoom in

1/71

English

Regardless of the setting of input selector buttons, when you set

the REC OUT selector to a position other than “SOURCE”, the

source selected by the REC OUT selector can be recorded by other

tape deck (MD recorder) and/or VCRs connected to this unit.

While recording a source by setting the REC OUT selector to the

position other than SOURCE as described above, the following

operations can be made at the same time.

●

You can monitor the audio (or the audio and video) signals being

recorded by selecting the recording unit (TAPE (MD), VCR 1 or

VCR 2) with the corresponding input selector button.

●

You can watch or listen to any other source by selecting it with the

corresponding input selector button.

NOTE: Adjusting the master VOLUME, BASS, TREBLE controls,

etc., or selecting a sound field program has no effect on the material

being recorded.

NOTE: Composite video and S video signals pass independently

through this unit’s video circuits. Therefore, when recording or

dubbing video signals, if your video source unit is connected to

provide only a S video (or only a composite video) signal, you can

record only a S video (or only a composite video) signal on your

VCR.

NOTE: A source that is connected to this unit between digital jacks

only cannot be recorded by a tape deck or VCR connected to this

unit.

NOTE: Please check the copyright laws in your country to record

from records, compact discs, radio, etc. Recording of copyright

material may infringe copyright laws.

If you watch a video software that uses scramble or

encoded signals to prevent it from being dubbed, there may

be a case that display information superimposed on the

picture and/or the picture itself is disturbed due to those

signals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-A1092 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha DSP-A1092 Manual

Product: