557375
26
Zoom out
Zoom in
Previous page
1/542
Next page
24
8
BASS EXTENSION switch
When this switch is pressed inward (ON), boosts bass
frequency response at the main left and main right channels
while maintaining overall tonal balance. If you do not have a
subwoofer, the use of this switch will be effective to reinforce
the bass frequencies.
9 SET MENU –/+ button
Performs setting changes and adjustments for functions
selected by pressing the NEXT button.
NEXT button
Selects functions in the SET MENU mode whenever pressed.
0 BASS and TREBLE controls
Adjust low and high frequency response respectively for the left
main, right main and center channels only.
A PROGRAM selector button
Sequentially selects the digital sound field processing
programs in the or direction.
B BALANCE control
This control is effective only for the sound from the main
speakers.
This control adjusts the balance of the output volume to the left
and right main speakers to compensate for sound imbalance
caused by speaker location or listening room conditions.
C EFFECT button
Switches on and off the output from the center, rear and front
effect speakers. When switched to off, the sound becomes
normal 2-channels.
* Even if the output from the center, rear and front effect
speakers is off, when the Dolby Digital (AC-3) or the DTS is
decoded, signals at all channels are distributed to the main
channels and output from the main speakers.
D REC OUT selector
Selects the source to be recorded to an MD recorder (or tape
deck 1) or VCR 1 independently of the setting of the INPUT
SELECTOR. However, when set to the SOURCE position, the
setting of the INPUT SELECTOR decides the source to be
recorded to an MD recorder (or tape deck) or VCR.
E INPUT MODE button
Switches the mode of selecting input signals between “AUTO”,
“DTS” and “ANALOG” modes for sources that input two or
more types of signals to this unit. (Refer to page 41 for details.)
* For LD source, this switches among “AUTO”, “AC-3 RF”,
“DTS”, “DIGITAL” and “ANALOG” modes.
F VIDEO AUX terminals
Connect an auxiliary video or audio input source unit such as a
camcorder to these terminals. If the connected video unit has a
S video output terminal, connect it to the S VIDEO terminal to
obtain a high resolution picture. The source connected to these
terminals can be selected by the INPUT SELECTOR and REC
OUT selector.
G Control door
When it is not necessary to operate controls inside the control
door, close the door.
To open the door
To close the door
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-A1 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 8,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info