464133
75
Zoom out
Zoom in
Previous page
1/79
Next page
Before you call an engineer
70
English
I cannot playback (Super) Video CDs
It is possible that this (Super) Video CD contains a menu and the “PBC” is switched
off. You can see this in status field
PBC OFF
”. To activate this function, proceed as
follows:
1
Press
SYSTEM-MENU
while the (Super) Video-CD is inserted.
2
Select “ using
t
or
u
.
3
Select line
Features
” using
w
or
v
and confirm with
u
.
4
Select “
On
” in line
PBC
” using
w
or
v
.
5
Confirm with
ENTER/OK
and end with
SYSTEM-MENU
.
Poor playback on DVD recorder: (distorted
picture/distorted sound)
Your TV set is not properly adjusted.
Disc is dirty: Clean the disc
Sometimes the picture may be temporarily distorted. This is not a defect of your
DVD recorder.
No recording possible:
The TV channel you want to record is not stored or you selected the wrong pro-
gramme number:
Check TV channels stored.
Disc write-protected (recording protected): Remove write-protection or change
the disc. For more information, please see “Preventing accidental erasing of discs”
in chapter “Manual Recording”.
An already finalised DVD+R has been inserted: Change disc.
Programmed recording does not work:
You have programmed the wrong time or date: Check time/date.
You have not set the TIMER properly: Check the programmed recordings (TIMER
block).
Locked disc inserted: Remove disc lock.
An already finalised DVD+R has been inserted: Change disc.
“VPS/PDC” switched on but “VPS/PDCtime” wrong: Enter “VPS/PDC” time exactly
to the minute.
Check the aerial.
The wrong TV channel was decoded
(entered) after you programmed a
recording using S
HOW
V
IEW
System.
1
Enter the S
HOW
V
IEW
programming number of the TV channel you want.
2
Confirm with
ENTER/OK
.
3
Check the programme number/channel name in the
Prog.
” input field.
4
If this does not correspond to the desired TV channel, select the input field and
change the programme number/channel name.
5
Confirm with
ENTER/OK
.
There is picture or sound interference on
TV reception:
Have your aerial checked.
You will find information on how to change the TV system in “Manual TV channel
search” in “Installing your DVD recorder”.
Distorted sound coming from a connected
hi-fi amplifier
The DVD recorder is connected to the “Phono-input” of your amplifier: This socket
is provided only for record players without a preamplifier. Select a different audio
input.
The picture is distorted or black-and-white
during playback
The TV system of the disc does not match that of your TV set (PAL/NTSC).
The recording can be made in colour only when the TV channels or the connected
additional device send a colour signal. Black-and-white signals containing no color
information (colour subcarriers) cannot be recorded.
No sound signal at the digital output
Check whether the sound settings match the selected inputs and connected addi-
tional devices.
PROBLEM SOLUTION
DRX-2_G.book Page 70 Tuesday, October 14, 2003 5:02 PM
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DRX-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DRX-2 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DRX-2

Yamaha DRX-2 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info