464133
62
Zoom out
Zoom in
Previous page
1/79
Next page
57
Programming a recording (TIMER)
10.
Programming a recording (TIMER)
Use “Programming a recording (TIMER)”, to automatically start and stop a recording at
a later date.
The DVD recorder will switch to the right programme number and begin recording at
the correct time.
With this DVD recorder, you can pre-programme up to six recordings within a period
of one month.
To make a programmed recording, your DVD recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
* VPS or PDC on or off
* the recording mode (“
M1
/
M2
/
M2x
/
M3
/
M4
/
M6
/
FR
”)
This information is saved in a “TIMER block”.
General
Question
What is “VPS/PDC”?
“VPS” (Video Programming System)/“PDC” (Programme Delivery Control) are
used to control the start and duration of TV channel recordings. If a TV programme
starts earlier or ends later than was scheduled, the DVD recorder will then turn on
and off at the correct time.
What do I need to know about “VPS/PDC”?
Usually the start time is the same as the VPS or PDC time. If a different “VPS/
PDC time” is indicated, e.g.: “20.15 (VPS/PDC 20.14)”, the VPS/PDC time
“20.14” must be entered exactly to the minute during programming.
If you want to programme a time that is different from the VPS or PDC time,
you must switch off VPS or PDC.
Only one TV program of a TV channel can be controlled using “VPS/PDC” at a
time. If you want to record two or more TV programmes on a TV channel using
“VPS/PDC”, you will need to programme these as two separate recordings.
Since the DVD recorder requires a certain lead time (for getting the disc up to
speed and positioning the laser) before recording can start, it is possible that the
recorder will miss the first few seconds of a TV show recorded with VPS/PDC.
In this case, disable VPS/PDC and enter a start time one minute earlier.
What is “FR mode”?
FR mode is used when you want to record a certain length of program but you
don’t know how much room remaining on the recording disc. By using this mode,
this unit automatically selects the best suitable recording mode for the length of the
program. You cannot select FR mode, when you set the recording timer of Mo-Fr/
Weekly, and when you set PDC/VPS on. We strongly recommend that you do not
use this function combined with VPS/PDC. In such a condition this DVD recorder
may not perform the task properly.
DRX-2_G.book Page 57 Tuesday, October 14, 2003 5:02 PM
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DRX-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DRX-2 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DRX-2

Yamaha DRX-2 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info