590418
186
Zoom out
Zoom in
Previous page
1/207
Next page
MIDI Data Format
A-22
1.2.18 Effect3 Depth (Chorus Send Level)
(ESBL Part)
Cntrl# Parameter Data Range
93 Effect3 Depth 0...127
1.2.19 Effect4 Depth (Variation Effect Send Level)
(ESBL Part)
Cntrl# Parameter Data Range
94 Effect4 Depth 0...127
1.2.20 Data Increment / Decrement (for RPN)
(ESBL Part)
Cntrl# Parameter Data Range
96 RPN Increment 0...127
97 RPN Decrement 0...127
1.2.21 NRPN (Non-Registered Parameter Number)
(ESBL Part)
Cntrl# Parameter Data Range
98 NRPN LSB 0...127
99 NRPN MSB 0...127
First send the NRPN MSB and NRPN LSB to specify the
parameter which is to be controlled. Then use Data Entry to set
the value of the specified parameter.
* Note that once the NRPN has been set for a channel subsequent
data entry will be recognized as the same NRPN’s value change.
Therefore, after you use the NRPN, you should set a Null (7FH,
7FH) value to avoid an unexpected result.
The following NRPN number can be received.
NRPN Data entry
MSB LSB MSB PARAMETER NAME and VALUE
RANGE
$01 $08 $mm Vibrato Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $09 $mm Vibrato Depth
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $0A $mm Vibrato Delay
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $20 $mm Filter Cutoff Frequency
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $21 $mm Filter Resonance
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $63 $mm EG Attack Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $64 $mm EG Decay Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $66 $mm EG Release Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$14 $rr $mm Drum Filter Cutoff Frequency
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$15 $rr $mm Drum Filter Resonance
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$16 $rr $mm Drum EG Attack
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$17 $rr $mm Drum EG Decay Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
Applies to both Decay1 and 2.
$18 $rr $mm Drum Instrument Pitch Coarse
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$19 $rr $mm Drum Instrument Pitch Fine
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$1A $rr $mm Drum Instrument Level
mm : $00 - $7F (0 - max)
rr : drum instrument note number
$1C $rr $mm Drum Instrument Pan
mm : $00 - $40 - $7F (random, left -
center - right)
rr : drum instrument note number
$1D $rr $mm Drum Instrument Reverb Send Level
mm : $00 - $7F (0 -max)
rr : drum instrument note number
$1E $rr $mm Drum Instrument Chorus Send Level
mm : $00 - $7F (0 - max)
rr : drum instrument note number
$1F $rr $mm Drum Instrument Variation Send
Level
mm : $00 - $7F (0 - max)
rr : drum instrument note number
MSB 14H- 1FH (for Drum) is valid only if the Multi Part
parameter PART MODE = DRUMS 1 or DRUMS2 for that
channel. (If PART MODE = DRUM, no values will be changed.)
1.2.22 RPN (Registered Parameter Number)
(ESBL Part)
Cntrl# Parameter Data Range
100 RPN LSB 0...127
101 RPN MSB 0...127
The following RPN numbers can be received.
RPN Data entry
MSB LSB MSB LSB PARAMETER NAME and VALUE
RANGE
00H 00H mmH Pitch Bend Sensitivity
mm:00-18H (0-24 chromatic steps)
Assignable in chromatic steps up to 2
octaves
Default : 02H
LSB value is ignored.
00H 01H mmH 11H Fine Tuning
mm: 00H-40H-7FH (-64-0-+63)
00H 02H mmH Coarse Tuning
mm: 28H - 40H - 58H (-24 - +24
chromatic steps)
LSB value is ignored.
7FH 7FH RPN null
Cancels RPN and NRPN numbers
1.2.23 Channel Mode Messages
The following Channel Mode Messages can be received.
2nd byte 3rd byte
120 0 All Sound Off
121 0 Reset All Controllers
123 0 All Note Off
124 0 Omni Off
125 0 Omni On
126 0 ~ 16 Mono
127 0 Poly
1.2.23.1 All Sound Off
(Piano Part, ESBL Part) (transmitted)
ESBL part;
Terminates all sounds currently sounding on the specified
channel. However, the status of channel messages such as
Note On and Hold On is maintained.
Piano Part;
The status of channel messages is not maintained.
1.2.23.2 Reset All Controllers
(ESBL Part)
The values of the following controllers will be reset to the
defaults.
CONTROLLER VALUE
Pitch Bend Change ±O (center)
Channel Aftertouch 0 (off)
Polyphonic Aftertouch 0 (off)
Modulation 0 (off)
Expression 127 (max)
Hold l 0 (off)
Portamento 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
186


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DGT2M2XG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DGT2M2XG in the language / languages: English, Spanish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DGT2M2XG

Yamaha DGT2M2XG User Manual - English - 16 pages

Yamaha DGT2M2XG User Manual - English - 14 pages

Yamaha DGT2M2XG User Manual - English - 5 pages

Yamaha DGT2M2XG User Manual - German - 16 pages

Yamaha DGT2M2XG User Manual - French - 16 pages

Yamaha DGT2M2XG User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info