707017
158
Zoom out
Zoom in
Previous page
1/179
Next page
En 158
Audio
The RED/GREEN/YELLOW/BLUE keys of the remote
control do not operate
The device which is connected to the unit via HDMI does not support the
operation of the RED/GREEN/YELLOW/BLUE keys.
Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE keys.
The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote
control have been changed.
Set “Color Key” (p.144) in the “Setup” menu to “Default”.
HDMI control setting is “Off”. Set “HDMI Control” (p.134) in the “Setup” menu to “On”.
Problem Cause Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio format
of the input signal, use “Information” in the “Sound” menu (p.125).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
The volume cannot be increased. The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.130).
No sound is coming from a specific speaker.
The playback source does not contain a signal for the channel. To check it, use “Information” in the “Sound” menu (p.125).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.125).
Audio output of the speaker is disabled.
Perform “YPAO” (p.44) or use “Configuration” in the “Setup” menu to change the speaker
settings (p.121).
The volume of the speaker is set too low.
Perform “YPAO” (p.44) or use “Level” in the “Setup” menu to adjust the speaker volume
(p.123).
The speaker cable connecting the power amplifier and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the power amplifier
may be malfunctioning.
No sound is coming from the subwoofer.
The playback source does not contain LFE or low-frequency signals.
To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu
(p.125).
Subwoofer output is disabled.
Perform “YPAO” (p.44) or set “Subwoofer 1” or “Subwoofer 2” in the “Setup” menu to
“Use” (p.123).
The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
No sound from the playback device (connected to the
unit with HDMI).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack exceeds the
limit.
Disconnect some of the HDMI devices.
Problem Cause Remedy
158


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CX-A5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CX-A5200 in the language / languages: English as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CX-A5200

Yamaha CX-A5200 User Manual - German - 179 pages

Yamaha CX-A5200 User Manual - Dutch - 179 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info