35474
7
Zoom out
Zoom in
Previous page
1/14
Next page
Accessory CD-ROM for Windows Installation Guide 7
Troubleshooting
The driver cannot be installed.
Is the USB cable connected correctly?
Check the USB cable connection.
Disconnect the USB cable, then connect it again.
Is the USB function enabled on your computer?
When you connect the instrument to the computer for the first time,
if the “Add New Hardware Wizard” does not appear, the USB
function on the computer may be disabled. Perform the following
steps.
1 Select [Control Panel] [System] [Device Manager] (for
Windows 98/Me), or select [Control Panel]* [System]
[Hardware] [Device Manager] (for Windows 2000/XP).
* Classic View only in Windows XP.
2 Make sure that no “!” or “x” marks appear at “Universal serial
bus controller” or “USB Root Hub.” If you see an “!” or “x” mark,
the USB controller is disabled.
Is any unknown device registered?
If driver installation fails, the instrument will be marked as an
“Unknown device,” and you will not be able to install the driver.
Delete the “Unknown device” by following the steps below.
1 Select [Control Panel] [System] [Device Manager] (for
Windows 98/Me), or select [Control Panel]* [System]
[Hardware] [Device Manager] (for Windows 2000/XP).
* Classic View only in Windows XP.
2 Look for “Other devices” in the menu “View devices by type.”
3 If you find “Other devices,” double-click it to extend the tree to
look for “Unknown device.” If one appears, select it and click the
[Remove] button.
4 Remove the USB cable from the instrument, and make the
connection again.
5 Install the driver again.
Windows 98/Me users........ see page 6
Windows 2000 users........... see page 6
Windows XP users.............. see page 6
When controlling the instrument from your computer via USB,
the instrument does not operate correctly or no sound is
heard.
Did you install the driver?
Is the USB cable connected correctly?
•Are the volume settings of the instrument, playback device, and
application program set to the appropriate levels?
•Have you selected an appropriate port in the sequence software?
On the Clavinova, check whether the Piano Lock is engaged or not.
Playback response is delayed.
Does your computer satisfy the system requirements?
Is any other application or device driver running?
Cannot suspend or resume the computer correctly.
Do not suspend the computer while the MIDI application is running.
If you are using Windows 2000, you may not be able to suspend/resume
normally, depending on the particular environment (USB Host
Controller, etc.). Even so, simply disconnecting and connecting the USB
cable will allow you to use the instrument functions again.
How can I delete or re-install the driver?
Windows Me/98
1 When the instrument is recognized correctly, double-click “System” in
the Control Panel to open the System window.
2 Double-click the “Device Manager” tab, then select “YAMAHA USB
MIDI Driver” and delete it.
3 Use the MS-DOS prompt or Explorer to delete the following three files.
n
To delete these files using Explorer, select “Folder Options” from the Tool
(View) menu, and select “Show all files (and folders).”
• \WINDOWS\INF\OTHER\YAMAHA***.INF
• \WINDOWS\SYSTEM\Xgusb.drv
• \WINDOWS\SYSTEM\Ymidusb.sys
4 Disconnect the USB cable.
5 Restart the computer.
6 Re-install the driver.
English
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP303 in the language / languages: French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP303

Yamaha CVP303 User Manual - English - 14 pages

Yamaha CVP303 User Manual - English - 220 pages

Yamaha CVP303 User Manual - English - 20 pages

Yamaha CVP303 User Manual - German - 14 pages

Yamaha CVP303 User Manual - German - 220 pages

Yamaha CVP303 User Manual - Dutch - 220 pages

Yamaha CVP303 User Manual - Danish - 219 pages

Yamaha CVP303 User Manual - French - 14 pages

Yamaha CVP303 User Manual - French - 220 pages

Yamaha CVP303 User Manual - Polish - 212 pages

Yamaha CVP303 User Manual - Portuguese - 220 pages

Yamaha CVP303 User Manual - Swedish - 217 pages

Yamaha CVP303 User Manual - Spanish - 14 pages

Yamaha CVP303 User Manual - Spanish - 80 pages

Yamaha CVP303 User Manual - Spanish - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info