599408
158
Zoom out
Zoom in
Previous page
1/164
Next page
156
156
CVP-98/96/600
Connecting to a Personal Computer
Although the Clavinova can be connected to a personal computer
via the MIDI IN/OUT connectors and a MIDI interface, the TO
HOST connector and HOST SELECT switch allow direct connec-
tion to Apple Macintosh or IBM-PC/AT personal computers for
sequencing and other music applications without the need for a
separate MIDI interface.
Connecting to an Apple Macintosh Series Computer
.......
Connect the TO HOST connector of the Clavinova to the modem or printer
port on your Macintosh, depending on which port your MIDI software is using
for MIDI data communication, using a standard Macintosh 8-pin system periph-
eral cable. Set the HOST SELECT switch to the “Mac” position.
You may also have to make other MIDI interface settings on the computer
side, depending on the type of software you use (refer to your software owner’s
manual). In any case the clock speed should be set to 1 MHz.
Connecting to an IBM-PC/AT Series Computer ................
Connect the TO HOST connector of the Clavinova to the RS-232C port on your
IBM computer, using a standard 8-pin MINI DIN 9-pin D-SUB cross cable. Set
the HOST SELECT switch to the “PC-2” position.
Refer to your software owner’s manual for information on any settings you
might have to make on the computer side.
2 (HSK i)1
1 (HSK 0)2
5 (RxD-)3
MINI DIN
8-PIN
4 GND4
3 (TxD-)5
8 (RxD+)6
7 (GP i)7
6 (TxD+)8
MINI DIN
8-PIN
8 (CTS)1
7 (RST)2
2 (RxD)3
4 5 (GND)
8
3 (TxD) 5
MINI DIN
8-PIN
D-SUB
9-PIN
“Mac” Cable Connections
8-pin system peripheral cable.
Data transfer rate: 31,250 bps.
“PC-2” Cable Connections
8-pin mini DIN 9-pin D-SUB cable.
Data transfer rate: 38,400 bps.
Apple Macintosh
Series Computer
Set to the “Mac”
position.
HOST SELECTTO HOST
MIDIMac
PC
-
2PC
-
1
IBM-PC/AT
Series Computer
Set to the “PC-2”
position.
HOST SELECTTO HOST
MIDIMac
PC
-
2PC
-
1
When using the [TO HOST]
terminal of the Clavinova, first
turn the power off on both the
Clavinova and the computer
before connecting the cable.
After connecting the cable,
turn the power of the compu-
ter on first, then the
Clavinova.
When not using the [TO
HOST] terminal of the
Clavinova, make sure the
cable is disconnected from
the [TO HOST] terminal. If
the cable is left connected,
the Clavinova may not func-
tion properly.
When the HOST SELECT
switch is set to “Mac”, “PC-1”,
or “PC-2, no data transfer
occurs via the MIDI connec-
tors. To use the MIDI connec-
tors for connection via a
standard MIDI interface, set
the HOST SELECT switch to
“MIDI”.
If your system doesn’t work
properly with the connections
and settings listed above,
your software may require
different settings. Check your
software operation manual
and if it requires a 31,250
bps. data transfer rate, set
the HOST SELECT switch to
“PC-1”.
158


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP-96 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP-96 in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP-96

Yamaha CVP-96 User Manual - English - 75 pages

Yamaha CVP-96 User Manual - German - 164 pages

Yamaha CVP-96 User Manual - German - 75 pages

Yamaha CVP-96 User Manual - French - 164 pages

Yamaha CVP-96 User Manual - French - 75 pages

Yamaha CVP-96 User Manual - Portuguese - 95 pages

Yamaha CVP-96 User Manual - Spanish - 164 pages

Yamaha CVP-96 User Manual - Spanish - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info