599145
149
Zoom out
Zoom in
Previous page
1/163
Next page
146
6
NAttach the main keyboard unit. (Part 2)
With the protruding screw heads on the bottom panel
of the main unit positioned behind the side-panel rear
brackets, slide the main keyboard unit forward until the
screw heads stop against the end of the slot in the rear
brackets. Align the holes in the bottom of the main unit
with those in the front side-panel brackets (
also center
the main unit to produce an equal clearance on the left
and right sides, as shown in the illustrations), then se-
cure the main keyboard unit to the stand assembly us-
ing two 6 x 20 mm (large flat-head) screws 2 screwed
through the front bracket and then firmly tightening the
two protruding screws that slid into the rear brackets.
Put the speaker box cover back in place with the
“Velcro” on the cover and speaker box. (Make sure that
the upper edge of the cover fits snugly against the un-
der side of the main unit.)
MConnect the speaker cord and pedal cord.
Insert the speaker cord connector into the correspond-
ing socket on the right (closest to the pedal box) of the
keyboard unit. Plug the pedal cord connector into the
socket on the left (farthest from the pedal box) of the
keyboard unit. Note that both connectors must be in-
serted with the protruding clip facing the rear of the
main unit.
NDie Haupteinheit montieren. (Teil 2)
Positionieren Sie die Haupteinheit so auf der Ständer-
baugruppe, daß die beiden eingedrehten Schrauben
hinter den hinteren Halterungen an den Seitenwänden
zu liegen kommen, und schieben Sie dann nach vorn,
bis die Schrauben bis zum Anschlag in den
Halterungsschlitzen sitzen. Bringen Sie die Bohrungen
der vorderen Halterungen mit denen an der Unterseite
der Haupteinheit zur Deckung (
achten Sie auch darauf,
daß die Haupteinheit mittig positioniert ist, d.h. links
und rechts gleichviel übersteht, wie in der Abbildung
gezeigt), und schrauben Sie die Haupteinheit dann mit
zwei weiteren Senkschrauben (6 x 20 mm) 2 an den
vorderen Halterungen fest, um danach die beiden be-
reits eingedrehten Schrauben fest anzuziehen. Bringen
Sie nun die Bespannung wieder an, indem Sie die
Klettband-Gegenstücke an Bespannungsrahmen und
Lautsprecherkasten aufeinander ausrichten. (Die Ober-
kante des Bespannungsrahmens muß bündig an der
Unterseite der Haupteinheit anliegen.)
MDas Lautsprecherkabel und das Pedalkabel
anschließen.
Schließen Sie das Lautsprecherkabel an die rechte
(dem Pedalkasten am nächsten gelegene) Buchse an an
der Unterseite der Haupteinheit an. Das Pedalkabel
schließen Sie an die linke (am weitesten vom Pedal-
kasten entfernte) Buchse an. Die beiden Stecker müs-
sen mit der Führungsnase in Richtung Rückseite (der
Haupteinheit) in die jeweilige Buchse gesteckt werden.
A
A
C
A
2
6 x 20 mm (large flat-head) screw
Senkschraube (6 x 20 mm)
Grosses vis de 6 x 20 mm (à tête plate)
Tornillo de 6 x 20 mm
(grande de cabeza plana)
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP-79A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP-79A in the language / languages: German as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP-79A

Yamaha CVP-79A User Manual - English - 163 pages

Yamaha CVP-79A User Manual - French - 163 pages

Yamaha CVP-79A User Manual - Portuguese - 40 pages

Yamaha CVP-79A User Manual - Spanish - 163 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info