Connections – Using Your Instrument with Other Devices –
11
CHORD SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI Chord System Exclusive data (chord detect, root and
type) on or off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data
generated by external equipment on or off.
MIDI Transmit Settings
The explanations here apply to the TRANSMIT Page in step 4 on page 94. This determines which parts will
be sent as MIDI data and over which MIDI channel the data will be sent.
1Use the [A]/[B] buttons or [1]/[2] buttons to select the part for changing
transmit settings.
With the exception of the two parts below, the configuration of the parts is the same as those already
explained elsewhere in the Owner’s Manual.
UPPER
A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1
and/or 2).
LOWER
A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not
affected by the on/off status of the [ACMP ON/OFF] button.
2Use the [3] buttons to select a channel via which the selected part will be
transmitted.
NOTEIf the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel — resulting in unex-
pected sounds and possible glitches in the connected MIDI device.
NOTEProtected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted.
3Use the [4] – [8] button to determine the types of data to be sent.
The following MIDI messages can be set on the TRANSMIT/RECEIVE display.
NOTE (Note events) .........page 64
CONTROL CHANGE......page 64
PROGRAM CHANGE.....page 64
PITCH BEND ...................page 64
AFTER TOUCH................page 64
231
1
The dots corresponding to each channel (1–16)
flash briefly whenever any data is transmitted on
the channel(s).
NOTEIf “WLAN” is shown, this instrument can handle
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CVP-701 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CVP-701 in the language / languages: English as an attachment in your email.
The manual is 13,76 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
