Connections – Using Your Instrument with Other Devices –
11
By using a USB wireless LAN adaptor UD-WL01 (sold separately), you can connect this instrument with an
iPhone/iPad via a wireless network. For general operating instructions, refer to the iPhone/iPad Connection
Manual. This section covers only operations that are specific to this instrument.
Before starting operations, make sure that the USB wireless LAN adaptor is connected to the [USB TO
DEVICE] terminal and call up the setup display via [FUNCTION] → TAB [][] MENU 2 →
[H] WIRELESS LAN.
NOTEIf the USB wireless LAN adaptor is not recognized by the instrument, “WIRELESS LAN” for the [H] button is not shown. When “WIRELESS LAN” is not shown
even though a USB wireless LAN adaptor has been connected, turn the instrument off then on again.
Infrastructure Mode
Wireless LAN Settings
[A]/[B]Selects the network.
[G]UPDATEUpdates the network list on the display.
[I]DETAILSets the detailed parameters. After making these settings, press one of the
[7]/[8] (SAVE) button to actually save them.
IP ADDRESS:
Sets the IP address and other related parameters.
OTHERS:
When the instrument is connected to the network with the Infrastructure
Mode, the current time is shown on the Main display.
You can set the Time Zone via the [B] button and Daylight Saving Time
via the [C] button for your local time.
[1]/
[2]
WPSConnects this instrument to the network via WPS. After pressing this but-
ton, press the WPS button on your access point within two minutes.
NOTEMake sure that your access point supports WPS. About the confirmation and changes in the access
point settings, refer to the manual of the access point.
[3]/
[4]
MODE
CHANGE
Switches to the Ad Hoc Mode.
[5]/
[6]
INITIALIZEInitializes the connection setup to the default factory status.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CVP-701 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CVP-701 in the language / languages: English as an attachment in your email.
The manual is 13,76 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
