Connections – Using Your Instrument with Other Devices –
11
3Use the [1] buttons to select the function to be assigned to the pedal specified in
step 2.
For information on available parameters, see pages89 – 91.
NOTEYou can also assign other functions to the pedal — Punch in/out of Song (page 57) and Registration Sequence (page 76). If you assign multiple func-
tions to the pedal, the priority is: Punch in/out of Song → Registration Sequence → functions assigned here.
4Use the [2] – [8] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5When you have selected the left or center pedal in step 2, press the [H] (SWITCH WITH
R1 VOICE) button to turn this parameter OFF.
This setting locks the pedal function so that it does not change automatically when you change the Right 1
Voice.
6If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
Assignable Pedal Functions
For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a
footswitch.
ARTICULATIONWhen you use a Super Articulation Voice that has an effect assigned to the
pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.
You can turn this function on or off for each keyboard part on this display.
VOLUME*Allows you to use a foot controller to control the volume. This function is
available only for the pedal connected to the instrument’s AUX PEDAL jack.
SUSTAINAllows you to use a pedal to control the sustain. When you press and hold the
pedal, all notes played on the keyboard have a longer sustain. Releasing the
pedal immediately stops (damps) any sustained notes. If you are using the right
pedal or connected foot controller, the “HALF PEDAL POINT” parameter
allows you to specify how far down you should press on the pedal until the
damper effect starts working.
SOSTENUTOAllows you to use a pedal to control the Sostenuto effect. If you play a note or
chord on the keyboard and press the pedal while holding the note(s), the notes
will sustain as long as the pedal is held. However, all subsequent notes will not
sustain. This makes it possible to sustain a chord, for example, while other
notes are played staccato.
NOTEThis function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if
this has been assigned to the Foot Pedals.
SOFTAllows you to use a pedal to control the Soft effect. Pressing this pedal reduces
the volume and changes the timbre of the notes you play. This is effective only
for certain appropriate Voices. You can turn this pedal function on or off for
each keyboard part on this display. If you are using the right pedal or connected
foot controller, the “HALF PEDAL POINT” parameter allows you to specify
how far down you should press on the pedal until the soft effect starts working.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CVP-701 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CVP-701 in the language / languages: English as an attachment in your email.
The manual is 13,76 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
