599089
117
Zoom out
Zoom in
Previous page
1/138
Next page
CVP-509/505/503/501 Owner’s Manual 117
3
CVP-501: Keyboard Stand Assembly
5 Mount A.
Be sure to place your hands at least 10 cm from either end of A when
positioning it.
6 Secure A.
7 Connect the pedal cord.
8 Set the voltage selector and connect the power
cord.
9 Set the adjuster.
Rotate the adjuster until it comes in firm contact with the floor sur-
face.
CAUTION
• Fingers can become pinched between A and rear or side pan-
els, be extra careful so as not to drop A.
• Do not hold the keyboard in any position other than the position shown
in the illustration.
R
B
D
E
A
At least
10 cm
A
1 Center A to produce equal clear-
ance on the left and right sides.
2 Use 6 x 16 mm short screws to secure
A from the front.
1 Insert the pedal cord plug to the
pedal connector from the rear.
3 Attach the cord holders to the
rear panel as shown, then clip
the cord into the holders.
2 Use a vinyl tie to take up any
slack in the pedal cord.
WARNING
An improper voltage setting can cause serious damage to the Clavinova
or result in improper operation.
After completing the assembly, please check
the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the Clavinova clear of doors and other movable fix-
tures?
Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when you shake
it?
Tighten all screws.
• Does the pedal box rattle or give way when you step on
the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into the
sockets?
If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
When moving the instrument after assembly, always hold the bottom
of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling can result in dam-
age to the instrument or personal injury.
Voltage Selector
Before connecting the AC power
cord, check the setting of the volt-
age selector which is provided in
some areas. To set the selector for
110V, 127V, 220V or 240V main
voltages, use a “minus” screw-
driver to rotate the selector dial so
that the correct voltage for your
region appears next to the pointer
on the panel. The voltage selector is
set at 240V when the unit is initially shipped.
After the proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug adaptor may be
also provided in some areas to match the pin configuration of the AC
wall outlets in your area.
Do not hold here.
Hold here.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP-505PE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP-505PE in the language / languages: English as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP-505PE

Yamaha CVP-505PE User Manual - English - 4 pages

Yamaha CVP-505PE User Manual - English - 14 pages

Yamaha CVP-505PE User Manual - English - 104 pages

Yamaha CVP-505PE User Manual - English - 92 pages

Yamaha CVP-505PE User Manual - English - 20 pages

Yamaha CVP-505PE User Manual - English - 20 pages

Yamaha CVP-505PE Installation Guide - English - 32 pages

Yamaha CVP-505PE User Manual - German - 14 pages

Yamaha CVP-505PE User Manual - German - 104 pages

Yamaha CVP-505PE User Manual - German - 136 pages

Yamaha CVP-505PE User Manual - German - 20 pages

Yamaha CVP-505PE Installation Guide - German - 32 pages

Yamaha CVP-505PE User Manual - Dutch - 136 pages

Yamaha CVP-505PE User Manual - Danish - 136 pages

Yamaha CVP-505PE User Manual - French - 14 pages

Yamaha CVP-505PE User Manual - French - 136 pages

Yamaha CVP-505PE Installation Guide - French - 32 pages

Yamaha CVP-505PE User Manual - French - 20 pages

Yamaha CVP-505PE User Manual - French - 104 pages

Yamaha CVP-505PE User Manual - Italian - 136 pages

Yamaha CVP-505PE User Manual - Polish - 136 pages

Yamaha CVP-505PE User Manual - Portuguese - 136 pages

Yamaha CVP-505PE User Manual - Swedish - 136 pages

Yamaha CVP-505PE User Manual - Spanish - 14 pages

Yamaha CVP-505PE User Manual - Spanish - 136 pages

Yamaha CVP-505PE User Manual - Spanish - 20 pages

Yamaha CVP-505PE User Manual - Spanish - 104 pages

Yamaha CVP-505PE Installation Guide - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info