599088
91
Zoom out
Zoom in
Previous page
1/104
Next page
CVP-509/505/503/501 Reference Manual 91
Connections – Using Your Instrument with Other Devices –
10
MIDI System Settings
The explanations here apply to the SYSTEM Page in step 4 on page 89.
Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1 ▲▼]–[8
▲▼] buttons.
1 Local Control
Turns the Local Control for each part on or off. When Local Control is set to “ON,” the keyboard of the
instrument controls its own (local) internal tone generator, allowing the internal Voices to be played
directly from the keyboard. If you set Local to “OFF,” the keyboard and controllers are internally
disconnected from the instrument’s tone generator section so that no sound is output when you play the
keyboard or use the controllers. For example, this allows you to use an external MIDI sequencer to play
the instrument’s internal Voices, and use the instrument keyboard to record notes to the external sequencer
and/or play an external tone generator.
2 Clock setting, etc.
CLOCK
Determines whether the instrument is controlled by its own internal clock or a MIDI clock signal received
from an external device. INTERNAL is the normal Clock setting when the instrument is being used alone
or as a master keyboard to control external devices. If you are using the instrument with an external
sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to that device, set this
parameter to the appropriate setting: MIDI, USB 1, or USB 2. In this case, make sure that the external
device is connected properly (e.g., to the instrument’s MIDI IN terminal), and that it is properly
transmitting a MIDI clock signal. When this is set for control by an external device (MIDI, USB 1 or USB
2), the Tempo is indicated as “Ext.” in the Main display.
NOTE If the Clock is set other than INTERNAL, the Style or Song cannot be played from the panel buttons.
TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/Stop data is
transmitted even if a Song or Style is played back.
RECEIVE TRANSPOSE
Determines whether or not the instrument’s transpose setting is applied to the note events received by the
instrument via MIDI.
START/STOP
Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback.
3 MESSAGE SW (Message Switch)
SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off. The “Rx” setting
turns MIDI reception and recognition of MIDI System Exclusive messages generated by external
equipment on or off.
CHORD SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or
off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data generated by
external equipment on or off.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP-505 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP-505

Yamaha CVP-505 User Manual - English - 138 pages

Yamaha CVP-505 User Manual - English - 14 pages

Yamaha CVP-505 User Manual - English - 20 pages

Yamaha CVP-505 User Manual - English - 92 pages

Yamaha CVP-505 Installation Guide - English - 32 pages

Yamaha CVP-505 User Manual - English - 20 pages

Yamaha CVP-505 User Manual - German - 20 pages

Yamaha CVP-505 User Manual - German - 14 pages

Yamaha CVP-505 User Manual - German - 136 pages

Yamaha CVP-505 Installation Guide - German - 32 pages

Yamaha CVP-505 User Manual - Dutch - 136 pages

Yamaha CVP-505 User Manual - Danish - 136 pages

Yamaha CVP-505 Installation Guide - French - 32 pages

Yamaha CVP-505 User Manual - French - 14 pages

Yamaha CVP-505 User Manual - French - 136 pages

Yamaha CVP-505 User Manual - French - 104 pages

Yamaha CVP-505 User Manual - French - 20 pages

Yamaha CVP-505 User Manual - Polish - 136 pages

Yamaha CVP-505 User Manual - Portuguese - 136 pages

Yamaha CVP-505 User Manual - Swedish - 136 pages

Yamaha CVP-505 User Manual - Spanish - 14 pages

Yamaha CVP-505 User Manual - Spanish - 136 pages

Yamaha CVP-505 User Manual - Spanish - 20 pages

Yamaha CVP-505 User Manual - Spanish - 104 pages

Yamaha CVP-505 Installation Guide - Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info