593738
198
Zoom out
Zoom in
Previous page
1/224
Next page
Using Your Instrument with Other Devices
CVP-309/307 Owner’s Manual
198
MIDI Settings
MIDI System Settings
The explanations here apply to the SYSTEM display to
be called up in step 4 of the “Basic Operation” on
page 196.
LOCAL CONTROL
Turns the Local Control for each part on or off. When
Local Control is set to “ON,” the keyboard of the instru-
ment controls its own (local) internal tone generator,
allowing the internal voices to be played directly from
the keyboard. If you set Local to “OFF,” the keyboard
and controllers are internally disconnected from the
instrument’s tone generator section so that no sound is
output when you play the keyboard or use the control-
lers. For example, this allows you to use an external
MIDI sequencer to play the instrument’s internal voices,
and use the instrument keyboard to record notes to the
external sequencer and/or play an external tone genera-
tor.
Clock setting, etc.
CLOCK
Determines whether the CVP-309/307 is controlled by
its own internal clock or a MIDI clock signal received
from an external device. INTERNAL is the normal Clock
setting when the CVP-309/307 is being used alone or as
a master keyboard to control external devices. If you
are using the CVP-309/307 with an external sequencer,
MIDI computer, or other MIDI device, and you want to
synchronize it to that device, set this parameter to the
appropriate setting: MIDI, USB 1, or USB 2. In this case,
make sure that the external device is connected prop-
erly (e.g., to the CVP-309/307’s MIDI IN terminal), and
that it is properly transmitting a MIDI clock signal.
When this is set for control by an external device (MIDI,
USB 1 or USB 2), the Tempo is indicated as “Ext.” in the
Main display.
TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set
to OFF, no MIDI clock or Start/Stop data is transmitted
even if a Song or Style is played back.
RECEIVE TRANSPOSE
Determines whether or not the instrument's transpose
setting (page 55) is applied to the note events received
by the instrument via MIDI.
START/STOP
Determines whether incoming FA (start) and FC (stop)
messages affect Song or Style playback.
MESSAGE SW
SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI Sys-
tem Exclusive messages on or off. The “Rx” setting turns
MIDI reception and recognition of MIDI System Exclu-
sive messages generated by external equipment on or
off.
CHORD SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI chord
exclusive data (chord detect. root and type) on or off.
The “Rx” setting turns MIDI reception and recognition
of MIDI chord exclusive data generated by external
equipment on or off.
MIDI Transmit Settings
The explanations here apply to the TRANSMIT display
to be called up in step 4 of the “Basic Operation” on
page 196. This determines which parts will be sent as
MIDI data and over which MIDI channel the data will
be sent.
Operation
Select the part to be transmitted and the channel via
which the selected part will be transmitted. You can also
determine the types of data to be sent.
With the exception of the two parts below, the
configuration of the parts is the same as those
already explained elsewhere in this manual.
UPPER
The keyboard part played on the right side of the key-
board from the Split Point for the Voices (RIGHT1 and/
or 2).
LOWER
The keyboard part played on the left side of the keyboard
from the Split Point for the Voices. This is not affected by
the on/off status of the [ACMP ON/OFF] button.
SYSTEM display
TRANSMIT display
CVP-309_E.book Page 198 Monday, October 23, 2006 9:07 AM
198


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-cvp-309

Reset search

  • How to set up metronome function on Yamaha CVP-309 digital piano Submitted on 27-12-2024 at 02:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CVP-309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CVP-309 in the language / languages: English as an attachment in your email.

The manual is 12,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CVP-309

Yamaha CVP-309 User Manual - German - 224 pages

Yamaha CVP-309 User Manual - Dutch - 224 pages

Yamaha CVP-309 User Manual - Danish - 223 pages

Yamaha CVP-309 User Manual - French - 224 pages

Yamaha CVP-309 User Manual - Italian - 231 pages

Yamaha CVP-309 User Manual - Portuguese - 224 pages

Yamaha CVP-309 User Manual - Swedish - 221 pages

Yamaha CVP-309 User Manual - Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info