Traduzione di alcuni blocchi di testo relativi alla pubblicazione inglese Data List
CVP-210/208
176
Pagina 35
Many MIDI messages listed in the MIDI Data Format are expressed in decimal numbers, binary numbers and hexadecimal numbers. Hexadecimal numbers may
include the letter “H” as a suffix. Also, “n” can freely be defined as any whole number.
To enter data/values, refer to the table below.
Molti messaggi MIDI elencati nel MIDI Data Format sono espressi in numeri decimali, binari ed esadecimali. I numeri esadecimali potrebbero includere la lettera “H”
come suffisso. Inoltre, “n” può essere definita liberamente come qualsiasi numero intero.
Per immettere dati/valori, consultate la tabella sottostante.
•Except the table above, for example 144-159(decimal)/9nH/1001 0000-1001 1111(binary) denotes the Note On Message for each channel (1-16). 176-191/BnH/
1011 0000-1011 1111 denotes the Control Change Message for each channel (1-16). 192-207/CnH/1100 0000-1100 1111 denotes the Program Change Message
for each channel (1-16). 240/FOH/1111 0000 denotes the start of a System Exclusive Message. 247/F7H/1111 0111 denotes the end of a System Exclusive Mes-
sage.
•aaH (hexidecimal)/0aaaaaaa (binary) denotes the data address. The address contains High, Mid, and Low.
•bbH/0bbbbbbb denotes the byte count.
•ccH/0ccccccc denotes the check sum.
• ddH/0ddddddd denotes the data/value.
•Tranne la tabella soprastante, ad esempio 144-159(decimal)/9nH/1001 0000-1001 1111(binario) denota il messaggio di Note On per ciascun canale (1-16). 176-191/
BnH/1011 0000-1011 1111 denota il messaggio di Control Change per ciascun canale (1-16). 192-207/CnH/1100 0000-1100 1111 denota il messaggio di Program
Change Message per ciascun canale (1-16). 240/FOH/1111 0000 denota l’inizio di un messaggio di System Exclusive. 247/F7H/1111 0111 denota la fine di un mes-
saggio di System Exclusive.
•aaH (hexidecimal)/0aaaaaaa (binario) denota l’indirizzo dei dati. L’indirizzo contiene High, Mid, e Low.
•bbH/0bbbbbbb denota il conteggio dei byte.
•ccH/0ccccccc denota la somma di controllo.
• ddH/0ddddddd denota i dati/valore.
Pagina 37
*1 The data byte is ignored.
*2 Received when the Clock is set to External.
*3 Transmitted when the Clock is set to Internal and Transmit Clock is set to on.
*4 Transmitted when the Transmit Clock is set to on.
About Mic/Vocal Harmony column:
The relevant parameters are received by the song part designated by the Effect's Harmony Channel Parameter or Melody Parameter.
NRPN MSB: 14H – 1FH (for drums) message is accepted as long as the channel is set with a drum voice.
Data Entry LSB: Ignored.
*1 Il byte dei dati viene ignorato.
*2 Recevuto quando il Clock è impostato su External.
*3 Trasmesso quando il Clock è impostato su Internal e Transmit Clock è impostato su on.
*4 Trasmesso quando il Transmit Clock è impostato su on.
Riguardo la colonna Mic/Vocal Harmony:
I parametri relativi vengono ricevuti dalla parte di song designata dal parametro Harmony Channel di Effect o dal parametro Melody.
Il messaggio NRPN MSB: 14H – 1FH (per drums) viene accettato fino a quando il canale è impostato con una voce drum.
Immissione dati LSB: ignorata.
Pagina 39
* Not Received when Receive System Exclusive Message Parameters is set to off.
* Not transmitted when Transmit System Exclusive Message Parameters is set to off.
* Non ricevuto se i parametri Receive System Exclusive Message sono impostati su off.
* Non trasmesso se i parametri Transmit System Exclusive Message sono impostati su off.
Transmitted in response to Dump Request. Not received.
Trasmesso in risposta a Dump Request. Non ricevuto.
Pagina 42
The second byte of the address is considered as an Insertion effect number.
n: insertion effect number
For effect types that do not require MSB, the Parameters for Address 02 – 0B will be received and the Parameters for Address 30 – 42 will not be received.
For effect types that require MSB, the Parameters for Address 30 – 42 will be received and the Parameters for Address 02 – 0B will not be received.
When Bulk Dumps that include Effect Type data are transmitted, the Parameters for Address 02 – 0B will always be transmitted. But, effects that require MSB, when the bulk dump is received the Parameters for Address 02 –
0B will not be received.
Il secondo byte dell’indirizzo viene considerato come un numero di effetto Insertion.
n: insertion effect number
Per i tipi di effetto che non richiedono MSB, saranno ricevuti i parametri per Address 02 – 0B e non saranno ricevuti i parametri per Address 30 – 42.
Per i tipi di effetto che richiedono MSB, saranno ricevuti i parametri per Address 30 – 42 e non saranno ricevuti i parametri per Address 02 – 0B.
Quando vengono trasmessi Bulk Dumpsche includono dati di Effect Type, verranno sempre trasmessi i parametri i parametri per Address 02 – 0B. Ma, per gli effetti che richiedono MSB, quando si riceve il bulk dump non saranno
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha CVP-208 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha CVP-208 in the language / languages: Italian as an attachment in your email.
The manual is 5,96 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
