48734
137
Zoom out
Zoom in
Previous page
1/196
Next page
137
FMod (Filter Modulation Depth)
Set the amount by which the filter Cutoff frequency
changes when the controller (Source) is used.
Settings: 0 ~ 127
AMod (Amplitude Modulation Depth)
Set the amount by which the amplitude modulation
changes when the controller (Source) is used.
Settings: 0 ~ 127
Part Insertion Effect (A/D Input Part only)
You can set parameters for the Insertion Effects used
by the A/D Input Part. If you have selected the A/D
Input Part, as the InsEF (Insertion Effect) in the EFF
Part screen, the following screens will be available.
EFF EF1/2 (Insertion Effect 1/2)
Choose the type of effect used for the A/D Input Part.
You can select the Effect Category for Insertion Effect 1/2
with the Ctgry parameter and the Effect Type with the
Type parameter. After selecting the Effect Type, you can
start setting its parameters by pressing the [ENTER] key.
The connection between Insertion Effects 1 and 2 is fixed
as 1 2 (Serial).
Ctgry (Effect Category)
Set the Category of the Effect. The first Effect Type
of the selected Category will blink.
Settings: Details are given in the Effect Types list of the
separate Data List.
Type (Effect Type)
Set the type of Effect. This depends on the selected
Category. For certain Categories, the Effect Type will
blink. In this case, you can press the [ENTER] key
to set the Effect Type.
Settings: Details are given in the Effect Types list of the
separate Data List.
Dry/Wet
Set the mix level of the wet signal (which has been
passed through the Effects Unit) and the dry signal
(which has not been passed through the Effects
Unit). This may be unavailable, depending on the
selected Effect Type.
Settings: D63>W ~ D=W ~ D<W63
EFFíEF1) Ctgry Type Dry/Wet [ENTER]
PartAD DLY:DelayLCR D<W63 to Edit
Effect Parameter Settings
These parameters are available when you press the
[ENTER] key for certain Effect Types.
Use the [PAGE] knob to switch between screens,
and use the other knobs and the [INC/YES] and
[DEC/NO] keys to set each parameter.
When you press the [EXIT] key, you will be
returned to the Effect Type selection screen.
The number of parameters and the contents of each
screen will vary depending on the selected Effect
Type. Details are given in the Effect Type list of the
separate Data List.
Zones (CS6x)
You can edit the zones used by Performances in Master
Keyboard Mode. Use Knob [A] (or BANK [A]~[D]
keys) to select the zone (1 to 4), then set the zone’s
parameters. The following eight screens are available
for Master Keyboard parameters.
You can choose zones if “4zone” has been selected as
the Mode at the GEN M.Kbd screen (Page 123), and if
the [MASTER KEYBOARD] key LED is lit.
Master keyboard
MKB Transmit (Master Keyboard Transmit)
MKB Note (Master Keyboard Note)
MKB TxSw1 (Master Keyboard Transmit Switch 1)
MKB TxSw2 (Master Keyboard Transmit Switch 2)
MKB TxSw3 (Master Keyboard Transmit Switch 3)
MKB TxSw4 (Master Keyboard Transmit Switch 4)
MKB TxPreset1 (Master Keyboard Transmit Preset 1)
MKB TxPreset2 (Master Keyboard Transmit Preset 2)
EXIT ENTER
SHIFT PAGE
PART
/
ELEMENT
DATAA B C 1 2
EFFíEF1) Delay Lch Cch Rch
PartAD 333.3 500.0 500.0 166.7
EFFíEF1) Ctgry Type Dry/Wet [ENTER]
PartAD DLY:DelayLCR D<W63 to Edit
Select Effect Type
Parameters
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS6R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS6R in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS6R

Yamaha CS6R User Manual - German - 196 pages

Yamaha CS6R User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info