Manual Yamaha CS6R (page 131 of 196) (English)

48734

131

Zoom out

Zoom in

1/196

131

Performance Mode

■ Reso (Resonance)

Set the amount of Resonance (harmonic emphasis)

applied to the signal at the Cutoff frequency. This

adds further character to the sound.

❏ Settings: -64 ~ 0 ~ +63

TON EG (Tone Envelope Generator)

You can set EG (Envelope Generator) parameters for

each Part. There are four parameters governing the

transition in output level from the moment a note is

pressed on the keyboard to the moment it is released or

the point at which the output level has faded to zero.

This screen is not available for the A/D Input Part.

For more information, refer to a diagram that illustrate the

concept of Envelope Generator, which you can find in Voice

or Phrase Clip Edit Mode sections.

Part 1 to 16

Plug-in 1/2 Part

Multi Plug-in Part

Phrase Clip Part

Drum Voice Part

■ Attack

Set the transition time from the moment a key on

the keyboard is pressed to the point at which the

output level of the Part reaches its peak. A positive

value will lengthen the transition time and a

negative value will shorten it.

❏ Settings: -64 ~ 0 ~ +63

■ Decay

Set the transition time from the point at which the

output level of the Part reaches its peak to the point at

which it levels off. A positive value will lengthen the

transition time and a negative value will shorten it.

❏ Settings: -64 ~ 0~ +63

■ Sustain

Set the output level of the Part maintained while the

key on the keyboard is being held down.

This parameter is not available for Plug-in, Phrase Clip

or Drum Voice Parts.

❏ Settings: -64 ~ 0 ~ +63

TONíEG) Attack Decay 

PartCL + 0 + 0

TONíEG) Attack Decay Release

PartP1 + 0 + 0 + 0

TONíEG) Attack Decay Sustain Release

Part01 + 0 + 0 + 0 + 0

■ Release

Set the transition time from the point at which the

note on the keyboard is released to the point at

which the output level of the Part reaches zero. A

positive value will lengthen the transition time and a

negative value will shorten it.

This parameter is not available for Phrase Clip or Drum

Voice Parts.

❏ Settings: -64 ~ 0 ~ +63

TON Portamento (Tone Portamento)

You can set the following three Portamento parameters

for each Part.

This screen is not available for A/D Input, Phrase Clip or

Drum Voice Parts.

Part 1 to 16

Plug-in 1/2 Part

Multi Plug-in Part

■ Switch (Portamento switch)

Switch Portamento on or off. With Portamento

switched on, there will be a smooth transition in

pitch from the first note played to the next note.

❏ Settings: off, on

■ Time (Portamento Time)

Set the pitch transition time. Higher values mean

longer transition times.

❏ Settings: 0 ~ 127

■ Mode (Portamento Mode)

Select the Portamento Mode. The Portamento Mode

behavior varies according to the Part Mode (mono/poly)

setting in the LYR Mode screen (Page 133).

This parameter is not available for Plug-in 1/2 and

Multi Plug-in Parts.

❏ Settings: fingered, fulltime

If Part Mode is set to “mono”:

fingered:

Portamento is applied when the keyboard is played legato (a

note is played before the previous note is released).

full:

Portamento is applied for all playing styles.

If Part Mode is set to “poly”:

Portamento is applied to multiple notes.

TONíPortamento) Switch Time 

Part17 on 127

TONíPortamento) Switch Time Mode

Part01 on 127 fulltime

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS6R in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS6R

Yamaha CS6R User Manual - German - 196 pages

Yamaha CS6R User Manual - Dutch - 192 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha CS6R Manual

Product: