Manual Yamaha CS6R (page 69 of 196) (English)

48734

Zoom out

Zoom in

1/196

Basics

Section

Selecting a Zone opens the MKB Transmit

screen. You may want to select a sub screen to

set up a Zone using the [PAGE] knob. But you

first specify basic items in the MKB Transmit

screen, such as MIDI transmit channel, enabling

or disabling MIDI output to the internal tone

generator and to the MIDI OUT connector.

5Set MIDI transmit channel (TrnsCh) to “Ch01”

using the Knob [C]. Set MIDI output to the

internal tone generator (TG) and MIDI OUT

(MIDI) both to “on.”

These settings can differentiate each Zone from

one another, to internally or externally output

performance made in each Zone using a

separate MIDI channel. Finally, you will

separately control sound tones from four zones.

To do this, set “Ch01” to “Ch04” respectively to

the “TrnsCh” parameters in the MKB Transmit

screens for Zones 1 to 4. For the “TG” and

“MIDI” parameters, set both “on” for Zones 1

to 3. For Zone 4, set “off” to “TG” and “on” to

“MIDI.” You can switch between multiple

MKB Transmit screens using the Knob [A].

Some of basic settings for four zones are now

complete.

6Select “Zone01” again using the Knob [A].

Open the MKB Note screen using the [PAGE]

knob. In this screen, you can specify a key

range for a Zone.

In the MKB Note screen, you can also find other

parameters such as Note Limit, Transpose, etc.

Refer to Page 138 for more information about

these parameters.

7Set “Note Limit” (zone key range) with the

lowest and highest notes using Knobs [1]

(lowest) and [2] (highest). For “Zone01”, select

“C-2” for the lowest note and “B1” for the

highest.

8Use the Knob [A] to switch to the MKB Note

screen for “Zone02”. As in the same manner in

step 7, select “C2” for the lowest note and

“B2” for the highest.

9Use again the Knob [A] to switch to the MKB

Note screen for “Zone03”. As in the same

manner in step 7, select “C3” for the lowest

note and “G8” for the highest.

)Use the Knob one more time [A] to switch to

the MKB Note screen for “Zone04”. As in the

same manner in step 7, select “C3” for the

lowest note and “G8” for the highest. Note

that this key range setting will make a

overlapped range with Zone 3.

For detailed settings of a Zone, refer to Page 137.

MKBíNote)Octave Transpose Note Limit

Zone01 +1 +11 C-2 - G 8

!Turn the Knob [A] and select a Part for a Zone.

In this example, we select Phrase Clip Part for

Zone 1, Part 2 and Part 3 respectively for Zone

2 and Zone 3. We don’t select any internal Part

for Zone 4 since Zone 4 is set only to output

performance information via the MIDI OUT

connector. First, select Phrase Clip Part

(PartCL) for Zone 1.

You can also use the MEMORY or

PROGRAM/PART keys to select a Part for a

Zone (Page 119).

@Use the [PAGE] knob and open the MIX Kit

screen, to set up a Clip Kit for performance

using Phrase Clips.

A necessary Phrase Clip Kit should be prepared

in Phrase Clip Mode before you use in this setting

in Performance Mode.

#Use the [PAGE] knob and open the Layer Mode

(LYR Mode) screen. Set Layer Switch (Layer)

to “off,” MIDI receive channel (RcvCh) to “1.”

With settings made in steps ! to #, you can

now play Phrase Clips from the Clip Kit

assigned to “PartCL” (Phrase Clip Part) set to

MIDI receive channel 1 (RcvCh) when you

play in the key range of Zone 1.

$As in the same manner in steps ! to #, set up for

Zone 2. Turn the Knob [A] and select “Part02”.

Next go to the MIX Vce (Mix Voice) screen using

the [PAGE] knob, and select a Voice for

Arpeggiator. Then, use the [PAGE] knob to open

the LYR Mode (Layer Mode) screen and set RcvCh

(MIDI receive channel) to “2”. Also in this screen,

set the “Arp” switch to “on” for Arpeggiator

performance. Finally in the ARP Type (Arpeggio

Type) screen, set the Switch parameter to “on”.

With settings made here, you can now play with

Arpeggiator using a Voice assigned to “Part02”

set to MIDI receive channel 2 (RcvCh) when

you play in the key range of Zone 2.

%As in the same manner in steps ! to #, set up

for Zone 3. Turn the Knob [A] and select

“Part03”. Next go to the MIX Vce (Mix Voice)

screen using the [PAGE] knob, and select a

Voice for manual solo performance. Then, use

the [PAGE] knob to open the LYR Mode (Layer

Mode) screen and set the RcvCh (MIDI receive

channel) to “3”.

With settings made here, you can now play solo

using a Voice assigned to “Part03” set to MIDI

receive channel 3 (RcvCh) when you play in

the key range of Zone 3.

LYRíMode) Arp Layer RcvCh

PartCL on off 1

MIXíKit) Number 

PartCL 001(A01)[Dr:Clip Kit]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS6R in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS6R

Yamaha CS6R User Manual - German - 196 pages

Yamaha CS6R User Manual - Dutch - 192 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha CS6R Manual

Product: