48728

Yamaha CS2X Manual

44
Zoom out
Zoom in
Previous page
1/84
Next page
44
Feature Reference
Performance Mode
■ EFFECT
There are five effect parameters: REV TYPE (Reverb Type),
CHO TYPE (Chorus Type), VARI TYPE (Variation Type), VARI
PARAM (Variation Parameter) and VARI DATA (Variation
Data). For information about the three digital effects units,
see page 70.
REV TYPE (Reverb Type): Determines the type of Reverb
effect. You can choose from 12 types. (See the Effect Type
List in the separate “Data List” book.)
CHO TYPE (Chorus Type): Determines the type of Chorus
effect. You can choose from 14 types. (See the Effect Type
List in the separate “Data List” book.)
VARI TYPE (Variation Type): Determines the type of
Variation effect. You can choose from 62 types. (See the
Effect Type List in the separate “Data List” book.)
VARI PARAM (Variation Parameter): Determines the
Variation effect parameters. Available parameters depend
on the VARI TYPE setting.
n
If VARI TYPE is set to “Effect Off”, those Layers with VARI SEND set
to “on” (page 55) will not sound. When you don’t want to apply the
Variation Effect to the Layers, set VARI TYPE to “Thru”.
n
The Variation effect works as an Insertion effect in Performance
mode. (For more information, see page 70.)
For more information about each Variation effect parameter,
see the Effect Parameter List in the separate “Data List”
book.
Reverb Type Chorus Type
Variation Parameter
Variation Type
Variation Data
The letter "P" (Parameter) or "d"
(Data) displays to distinguish
between the Variation Parameter
and Variation Data screens.
ARPEGGIATOR HOLD
The ARPEGGIATOR HOLD function lets you play a chord to start the
automatic arpeggio then take your hand off the keyboard and have the
arpeggiated chord play continuously in a loop. Play another chord and
the automatic arpeggios will change accordingly.
Here’s how to activate the ARPEGGIATOR HOLD function:
1. Hold [SHIFT] and press [ARPEGGIO]. The Arpeggiator [▼] mark in
the LCD will start blinking to indicate the function is active.
2. Play a series of chords or notes.
3. To stop the arpeggiated chords, press [ARPEGGIO] again.
ARPEGGIATOR SPLIT
If you hold [SHIFT] and press the TYPE Parameter Value [UP] button
when the TYPE parameter is displayed in the LCD, the ARPEGGIATOR
SPLIT function will be enabled. A reversed type letter “S” will appear to
the right of the TYPE name to indicate the function is active.
The ARPEGGIATOR SPLIT function divides the keyboard at C3
(indicated by the [▼] mark printed above the keyboard) and lets you
play the arpeggiated chords on the lower half of the keyboard (below
C3) and play normal chords and notes on the upper half (C3 and above).
To cancel the function, hold [SHIFT] and press the TYPE Parameter Value
[DOWN] button.
TEMPO: Sets the tempo of the Arpeggiator in beats per
minute or to be controlled by an external MIDI clock.
Settings:
ARP Tempo: MIDI, 40 ~ 240 (beats per minute)
n
If you want to synchronize the tempo of the Arpeggiator with the
tempo of an external MIDI device, set the TEMPO parameter to
MIDI.
SUBDIVIDE: Determines the basic note timing resolution
settings of the Arpeggiator.
Settings:
ARP Subdiv: 3/8= q. , 1/4= q , 3/16= e. , 1/6= , 1/8= e , 3/32= x. ,
1/12= , 1/16= x , 1/24= , 1/32= r
n
Arpeggiator data can be output as MIDI messages.
n
The Arpeggiator data is normally output as MIDI messages from the
MIDI OUT terminal. You can cancel MIDI data output by holding
the [ARPEGGIO] button when switching on the power.
■ PERFORM LEVEL (Performance Level)
This determines the volume level of the Performance.
Settings:
Perf Level: 0 ~ 127
cCS2x_Ref 12/10/98 5:12 PM Page 44
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS2X in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS2X

Yamaha CS2X User Manual - German - 78 pages

Yamaha CS2X User Manual - Dutch - 108 pages

Yamaha CS2X User Manual - French - 78 pages

Yamaha CS2X User Manual - Portuguese - 130 pages

Yamaha CS2X User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info