48728

Yamaha CS2X Manual

35
Zoom out
Zoom in
Previous page
1/84
Next page
35
3. Decide the voice for each Part.
XGworks lets you use MIDI program change messages (page 75)
to call up the CS2x’s voices. There are many ways to do so. Take
a look at the Track View Window.
Based on the MIDI standard, each voice has its own bank
number and program number. Setting the appropriate bank select
and program change values will call up a specific CS2x voice.
You can set these in XGworks, with intuitive ease. You can assign
a voice to each Part (5 ~ 16).
In the parameter section of the Track View Window you can open
the Voice List. Like the CS2x, the voices are arranged in
categories. As shown, you can easily locate and select a voice by
choosing the basic category in column 1, which lists the types of
voice categories available column 2. Choosing a type will list the
available individual voices in column 3, available for selection.
When you select a voice from the Voice List, that track’s MIDI
transmit channel transmits the bank number/program number
(bank select/program change) to the same MIDI receive channel
as set by the CS2x.
n
In order to ensure automatic setup of all voice and other
parameter settings, you can insert the proper bank
select/program change and other messages at the top of the
song, before the music data starts playing. With XGworks this
is all done with ease using the List Window.
n
For more information, see the owner’s manual for XGworks.
n
The voice changes when the CS2x receives the
corresponding bank select/program change messages. When
you use this method, you can select not only each Part’s
voice but a Performance. The XGworks List Window makes
this especially convenient. Since there are extra “material”
voices available for use in Performance mode, you can
assign any of these to Parts 5 ~ 16. For more information, see
the separate “Data List” book.
Track 5
Track 6
Track 7
•
•
Track 10
•
•
Piano
Bass
Strings
•
•
Drums
•
•
Piano voice
Bass voice
Strings voice
•
•
Drums voice
•
•
Ch5
Ch6
Ch7
•
•
Ch10
•
•
Ch5
Ch6
Ch7
•
•
Ch10
•
•
XGworks XG/GM Tone Generator
4.
Set the volume and panning for each Part.
You can control the CS2x’s volume and panning for each Part
using control change messages (page 72) to change the values of
each, over a range of 0 ~ 127. From XGworks you can also
change these manually using the Mixer Window. This sends the
changes you make to volume fader and pan settings for each
individual MIDI channel as control change messages to each
corresponding CS2x Part.
Creating The Setup Data
You can set up the basic part parameters on the CS2x. You can
use the List Window to set up each track’s bank select and
program change data (for voices) at the top of the song as well as
control change data (for volume, panning, effects, etc.)
throughout the song so that the sequence software will play
everything back just as you want.
For details, see page 72.
You can program Performance data at the beginning of or
throughout a song so that an original Performance is
automatically selected for playback. This means that even if the
particular User Performance is not stored in the CS2x, the
appropriate data will be transmitted before the song data begins
so that your song plays exactly as you recorded it.
It requires setting up the sequencer for a Bulk Dump request to
receive the desired User Performance data. Following is an
explanation of how to do so using the real-time recording
function of XGworks as an example, where track 1 is used for
programming the User Performance data.
Pan Control
Volume Fader
cCS2x_Basic 2/2/99 11:01 AM Page 35
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS2X in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS2X

Yamaha CS2X User Manual - German - 78 pages

Yamaha CS2X User Manual - Dutch - 108 pages

Yamaha CS2X User Manual - French - 78 pages

Yamaha CS2X User Manual - Portuguese - 130 pages

Yamaha CS2X User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info