48730
49
Zoom out
Zoom in
Previous page
1/64
Next page
48
The diagram below shows the signal flow of the three effects when the
CS1x is in Multi Play mode and the Variation effect is designated as a
System effect.
Each of the 16 Parts has a Dry send !level which controls the amount of
original signal for each Part (page 38). Reverb send ", Chorus send #,
and Variation send $levels control the amount of effect applied to each
Part, determined by the Multi Edit EFFECT REV SEND, CHO SEND and VARI
SEND parameters (between 0~127), respectively (page 38). Reverb return
%, Chorus return &and Variation return 'levels can also be controlled
to determine the amount of each effect applied (page 38).
The Send Chorus to Reverb (level is sent from the Chorus effect to the
Reverb effect (page 38). The Send Variation to Reverb )and Send
Variation to Chorus *levels are sent from the Variation effect to the
Reverb and Chorus effects, respectively (page 38). These three
parameters let you make series and parallel effect configurations which
provide enormous sound enhancement flexibility.
If you select Effect Off in the Variation Type menu, the
Layers which have the VARI SEND function set to ON will not sound.
When you don't want to use the Variation Effect on the Layers, set the
VARI TYPE to Thru.
NOTE
Part 1
Part 2
Part 16
Rev
Cho
Vari
Rev Return Level
Cho Return
Vari Return
Vari to Rev
Vari to Cho
Cho to Rev
Dry Send
Rev Send Cho Send Vari Send
Vari Send, Cho Send, Rev Send = 0~127
•XG effect set to System
Out
!
"#$
%
&
'
(
)
*
Part 1
Part 2
Part 3
Part 16
wet/dry
MULTI
Send Cho to Rev
Rev Return Level
Cho Return Level
Cho SendRev Send
Rev
•XG effect set to Insertion
•Part 3 VARI SEND set to ON
Cho
Out
Vari
"#
%
&
$
!
Reverb and Chorus send levels for Layers with the Variation
Send On/Off switch set to ON are determined by the highest
numbered Layer. For example, if Layers 1, 2 and 3 are switched on,
then the Reverb and Chorus send level for Layer 3 will determine the
amount of effect applied to each Layer.
In Performance mode effect send levels for Parts 5~16 (as
well as Layers 1~4) can be controlled by an external MIDI sequencer.
The Variation effect cannot be applied to Parts 5~16.
Multi Play Mode
The diagram below shows the signal flow of the three effects when the
CS1x is in Multi Play mode and the Variation effect is designated as an
Insertion effect.
In Multi Play mode the various effect settings can be
controlled by MIDI system exclusive Parameter Change messages
(received from an external sequencer or computer). The illustrations at
right show the Reverb, Chorus and Variation send parameters which
can be controlled from the CS1x panel. For details about the others,
refer to each page number as listed in the following explanation.
When the CS1x is in Multi Play mode, the Variation Effect is
automatically reset as an Insertion Effect. If you want to set the
Variation Effect as a System Effect, you need to send a parameter
change message to the CS1x from an external MIDI sequencer.
The Variation (Insertion) effect can be applied to any one of the 16 Parts at
a time, designated by switching the Multi Edit EFFECT VARI SEND
parameter to ON (page 38). The ratio of Variation effect (wet) signal to
original (dry) signal is determined by the wet/dry balance !, which in
turn controls the amount of Variation effect signal applied to the Part
(page 38).
Although only one Part at a time can have the Variation effect applied to
it, all Parts, including the Part with Variation effect, can have Reverb and
Chorus applied, determined by the Reverb send "and Chorus send #
level settings (between 0~127) of the Multi Edit EFFECT REV SEND and CHO
SEND parameters, respectively (page 38). Reverb return $and Chorus
return %levels can also be controlled to determine the amount of each
effect applied. The Send Chorus to Reverb &level from the Chorus effect
to the Reverb effect can also be controlled in a series, if you assign it to
the ASSIGN 1 knob (page 26); in this case, the Chorus return %level
should be set to "0".
NOTE
NOTE
NOTE
NOTE
Layer 1 on
PERFORMANCE
Layer 2 on
Layer 3 on
Layer 4 off
wet/dry
Part 5
Part 16
Cho
Rev
Cho Send
Cho Send
Rev Send
Rev Send
Out
Knobl (Cho to Rev)
(for each layer/part)
(for each layer/part)
!
!
!
!
"
#
$
%
&
'
Vari
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS1X in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS1X

Yamaha CS1X User Manual - German - 196 pages

Yamaha CS1X User Manual - Dutch - 64 pages

Yamaha CS1X User Manual - French - 60 pages

Yamaha CS1X User Manual - Portuguese - 93 pages

Yamaha CS1X User Manual - Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info